--- In mach1mach2cnc@..., "Digital audio Pro"
<digitalaudiopro@w...> wrote:
Brian, i had this kind of problem with my A axis and was simply a
friction
problem when i was using an opposite center.
Try to connect it to another linear output to see if the problem
remain. If
yes it is certainly a mechanical problem.
Olivier.
I don't think that is the problem as I have no center set up and I
don't have a part in the chuck...
I have about 25 Deg/sec^2 accel and 25 Vel for the A axis and
12in/sec^2 and 2.0 vel for all others (XYZ).
Thank you for looking at this
here is a bit of the code:
G64
G90
G53 G00 Z-0.1
G54 X5.0 Y0.0 A0.0 (will not use the accel here)
G53 G00 Z-0.100
M6 T2
G43 H2 Z.5
X1.0031
A294.368 (Works great here)
Z0.1
G01 Z-0.02F6.5
X0.9674 A294.6099 (Will not work here)
G02 X0.9657 A296.2808 R0.5549
G01 A298.4799
A301.4043
A304.5926
G03 X1.0604 A303.3199 R0.6148
X1.079 A303.1538 R0.3565
X1.1079 A302.9499 R0.7166
X1.1867 A302.5257 R1.8256
X1.187 A305.3084 R9.989
X1.1867 A310.5955 R29.862
G02 X1.0867 A313.2256 R4.6652
X1.0021 A315.6056 R2.7252
X0.9442 A317.3958 R1.4197
X0.9147 A318.4095 R0.7772
X0.8957 A319.1345 R0.4951
X0.88 A319.8186 R0.3093
X0.8604 A320.8225 R0.4013
X0.8398 A322.1544 R0.3032
X0.8248 A323.6243 R0.2204
X0.8192 A326.0869 R0.1704
X0.8204 A326.4346 R0.1656
X0.8237 A326.9594 R0.0904
X0.8265 A327.2324 R0.0638
X0.8345 A327.6973 R0.051
X0.8404 A327.9042 R0.038
X0.8597 A328.1422 R0.0318
X0.8793 A327.8615 R0.0284
X0.8895 A327.2724 R0.037
X0.892 A326.6979 R0.0464
G01 A325.6795
A323.5825
G03 X0.8946 A322.7514 R0.0902
X0.9026 A321.8955 R0.1219
X0.9183 A320.8558 R0.1839
