--- In mach1mach2cnc@..., "barker806" <brian_barker@u...>
wrote:
--- In mach1mach2cnc@..., "Digital audio Pro"
<digitalaudiopro@w...> wrote:
Brian, i had this kind of problem with my A axis and was simply a
friction
problem when i was using an opposite center.
Try to connect it to another linear output to see if the problem
remain. If
yes it is certainly a mechanical problem.
Olivier.
Olivier
I did the Sub for the Y axis and it worked GREAT!!! I also can tell
you that the other axis (ABC) do NOT go throught the Accel that is
set in the table. I tried to run the mill with the A being the Y and
I lost steps like mad and it didn't even sound like the same mill...
I had all the same setting as when I used the Y axis (I also told it
it was a liner axis).
I hope this will help you Art.
If there is any thing I can do feel free to ask.
Brian
