开云体育

I am helping to sell off an estate for an SK and from that I have a Baofeng HT package he owned. All HTs are in pretty good condition overall, except the GT-3 is missing the rubber cover over the speaker mic jack. All 4 have belt clips attached to them. Here is what is available: Baofeng UV-5RA and GT-3. These are the famous 2m/70cm 5 watt HTs with FM broadcast band receive. Both work well and come with a drop in charger and dualband antenna. I also have a Baofeng speaker mic I will include which works on 3 of the HTs. It doesn't work with the GT-3 for some reason. The UV-RA is missing the original antenna but I will include either a Sainsonic thin whip antenna, or a Hypario HFA-701 slightly thicker but still flexible whip antenna (this is really a Nagonya 701 antenna). Pick out which one you want. Also Baofeng GT-1 and BF-888s 70cm HTs. Smaller than the dualband, both work on 70cm with programmable channels. I don't have the programming cable for these so don't know what channels are included. Both have drop in chargers but you have to make sure the BF-888s is situated just so in the charger to get it to work. The batteries seem pretty good on the dualband HTs, not sure on the 70cm ones but they do charge up. Can't guarantee how long the batteries will last on any of these. Asking $60 shipped for the whole package, and I can take paypal/check/MO. 73 John AF5CC

I have for sale three 2 meter extended whip high gain telescoping antenna. Really gives you gain on 2m. 8.5 inches collapsed, 49 inches extended. They have a spring loaded base like the Smiley antennas to keep it from putting too much strain on the connector. They have SMA female connectors so they work with the Baofeng and other Chinese (plus Yaesu FT65 and FT4) HTs. I tried it on UHF and it seems to bring up repeaters there also. Once has a lable saying High Gain Antennas VHF: 136-174 mhz. The other 2 look identical but don't have the labels on them. Asking $21 shipped for each one. I can take paypal/check/MO. 73 John AF5CC

We all know the manuals for Baofeng are difficult to understand. I have yet to be able to download the .img file from the radio using Chirp on linux. So, I thought I would manually program a channel for the local repeater. Yeah, right. Trying to make sense of the manual is pretty frustrating. There are a number of sites for the UV-5R, but I don't know if the menus are the same for both models. Can anyone shed some light on this? I would be grateful. 73, KK7MSN

I have recently come across this tool case at Super Cheap Auto, it might be worth checking out as a good solution for carrying and storing handheld radios. https://uhfbandmonitoring.blogspot.com/2024/10/tassie-devil-radio-case-compact-win-for.html

I just bought a Baofeng M-5R. I didn't need another HT, but this one features the aviation band as well as FM radio, 2m, and 70 cm. It came with an owner's manual titled "UV-5RX Series." I already have a few other Baofengs, so I got this one up and running without delay and the aviation band receiver (AM) seems to work well. One error in the manual (or maybe just a difference between models) is that changing the FM Radio band from 65-75 MHz to 76-108 MHz is stated to be accomplished using the A/B key. But the change is actually made using the BAND key. 73, Maynard W6PAP

Good afternoon, I'm trying out my TIDRADIO bluetooth adapter and trying to figure out an easy way to import radio frequency lists into my baofeng UV-5R. Is there one? thanks in advance,

I purchased a refurbished Baofeng UV-5RM Plug off of Amazon and it finally arrived today after UPS misplacing it for a week. It looks in good shape but is password protected when I turn it on. The seller didn't provide the password. Amazon has sent them a message but I wondering if there is a way to do a power on reset which will reset the radio when I don't have a password. Anyone know how to do this? 73 John AF5CC Sent using Zoho Mail

Do you know where the official DM-1701 v2.03 firmware and the "DMR Firmware Download software" can be downloaded? I downloaded the Baofeng_DM-1701_CPS_1.05 archive from their official site, but only the programming software "CPS DM-1701 V1.05" is inside and not the firmware update tool and the firmware itself. I can't find any official DM-1701 firmware or firmware update tools on the internet.

According to the documentation, DTMF options can be changed by pressing the # key. When I do that, it comes up with an empty menu, and for each time I press the # key, it adds a "#" with no explanation of what the #s mean. I got it to ####, now I can neither add nor delete #s, and I have no idea what any of this means. The manual just tells me how user friendly it is. What am I missing? 73, Lem W1LEM

Can I setup a UV82 to transmit on UHF and receive on VHF? PL on UHF. NO rcv PL Anybody know if I can do this?

Greetings; I bought a UV-25 from an Ebay store, and the radios receiver was Insensitive, it receives poorly. After complaining, the Ebay seller sent me another radio. It turns out that both radios receivers are insensitive. Using a TinyVNA's signal generator, through a switched step attenuator, the full quieting receive level is approximately -90dBm on 146, 440 MHz + WX channels. This level equates to approx. 6uV, or S6. VNA's signal generator sends a quiet carrier, no modulation. Using the same testing method on my other handy talkies, I achieve full quieting at -115 to -120 dBm. Note: I used my Rigol Spec Analyzer to verify that my test signals are accurate +/- 1dB. Searching Google and Youtube for help- I find Zilch. Could there an option that I don't understand the meaning of that could be set wrong? Any help is much appreciated. Thanks in Advance. -- 73, Ricky KR7W - Callsign Lookup by QRZ Ham Radio Ammon, ID

Here's some news from the Repeaterbook's Tower Talk newsletter. "Have you been waiting to use the amazing RT Systems radio programming software but you have a Mac? RT Systems has now released a MacOS version of their popular programming software for select radios. Download and get your radio programmed today!" https://rtsystems.freshdesk.com/support/solutions/articles/72000578515-rt-programmers-for-macos Not all radios are supported, but some of the more popular ones are. Donald KX8K ---------------------------------------------------- Some ham radio groups you may be interested in: /g/ICOM /g/Ham-Antennas /g/HamRadioHelp /g/Baofeng /g/CHIRP https://rf-amplifiers.groups.io/g/main

Gday to all, To, manually, program a memory channel, I use RECEIVE freq in the top register, then effortlessly use the menu to enter offset, SFT-D, etc. Even with a blank channel assignment, SFT-D is never saved to a memory channel. However, things go perfectly in VFO mode. Too much T-Giving turkey? 73 Phil, WF3W

So far I have not found this setting, but is there a way to lengthen then time your message stays on the screen at start up time? It flashes on then off very quickly. Just want to have it stay on for a little longer before going away. I have done the bulk of the programming using CHIRP. Thanks Bob W8RID

Just bought the UV-17 Pro Max and can't get it to be recognized with the CHIRP programming software I downloaded. I'm using a UV-17 version that doesn't say UV-17 Pro Max specifically. Any suggestions? Thanks - Bill N6GHz

Are there any Chinese mobile VHF/UHF dualband radios that let you store crossband memories, like where you receive on 70cm and transmit on 2m? The Baofeng HTs lets you do this-finally figured out how on the UV82, but in viewing a few manuals for the mobile radios I can't seem to find any mention of this. Would like something with a little higher power than the HTs to use on the FM satellites without spending a lot of money. This would almost seem necessary if you wanted to use one of these on the FM satellites in half duplex mode. 73 John AF5CC

I am having issues with a DM-1801 display says Low BT version. The radio was given to me this way. Is there a way to fix it and how Scott R. southbfd@...

Hardware: UV5R, SignaLink, Raspberry Pi3, APRS Software: Bookworm, Direwolf I have an APRS digipeater/igate set up with the above hardware software. It beacons, repeats, and igates, but when the SignaLink transmit light goes off and relay changes, the UV5R still transmits for a couple seconds. Anyone have any idea why? Thanks