开云体育

Frank, there are several flows in the files section of the group for the ERC including one of mine. I'm not sure which one you're using and suggest you elaborate and possibly include some debug nodes

Hi I? do not own a flexradio but I am helping VA2UR with his remote contest station. We want to capture the current transmit band , before starting transmission if possible. I am able to capture the

I'm trying to get ERC Rotor Control working with my Yaesu G-450A rotor controller and Node-Red.? The ERC works fine on Windows, but I'm getting an error when I connect it to Node-Red. I've imported

Contact me at support AT mkcmsoftware DOT com. Please send me a the list of settings that are not being restored. Have you tried to use FRStack Memory to recall mode and other settings? 73, Mark

*HELP with FRStack* I have configured my FLEX6600 (XVTR settings) for use with several transverters 144, 432, 1296 MHz…………. Selecting the different transverters from the Flex *Band selector*

Rich, Here you go. I just modified the original flow to have both rotators visible at once. 73, George / W7GES [email protected]> wrote:

Thanks Tim, I'll take a look at the files. I was successful with my first Node Red function. I was able to turn the Flex 8600 on and off with one of the relays on Georges #321 GPIO card. It was quite

Rich: From the Group web page, ( /g/nodered-hamradio )?there is a section on the left hand page that has links: (/g/nodered-hamradio/files (

George, Yes, please send the flow. Rich - N5ZC

Hi Rich, There are flows listed on the site for the Flex Radios / PGXL / TGXL / Antenna Genius. I modified the Rotor Genius flow to show the two rotors / headings at once. Let me know if you want the

I've just got started with Node Red. I just installed a couple Sierra Radio Systems cards on the inside of the rear door of my enclosed rack cabinet. I used magnets attached to the DIN rail for

A few weeks ago I posted a request regaurdingTailscale and Wavelog, not Nodered however many on here use Tailscale for ?Nodered access. Many thanks to Pat for responding. After a lot of research I

Sorry, I am not a Swift developer. 73, Scott AK5SD

Hi Scott I did some tries using AppleScript+Node-RED flollowing steps suggested but no luck. I'd would approach Swift based solution, but I never used Swift When you'll have time could you please

Thank you so much Scott !! I like very much option 2 via MQTT. I have a Debian machine here h24 7/7 hosting MQTT mariaDB Node Red and more that cares of my little shack integration.

That node was last updated 9 years ago. It's very likely that the OS X notification system has been completely overhauled since then. I don't have a solution for you, but this is what ChatGPT thinks

Hello in order to have the DX Alarms I've defined in the logger/cluster (RumLog) on my dashboard I'd like to get and then handle notification messages coming from my Mac into Node Red. I did several

Hi Bruno: There is a bit of a learning curve involved.??? First,? Look thru the Wiki section of this group to read some of the tutorials on setting up node red. Then I would suggest watching a few

I will answer my own question.?? I have since learned that trying to run several Node-Red flows, plus an MQTT Broker, Plus MS DotNet and FRStack APIs on an RPi3 with 1GB of ram will be.....?

The Flex v16 flow I wrote is the latest. Make sure to follow the WiKi as there is a list of extra nodes that require install. 73 Dave wo2x Sent: Thursday, March 13, 2025 2:28 PM To: