Thanks Tim,
I'll take a look at the files.
I was successful with my first Node Red function. I was able to turn
the Flex 8600 on and off with one of the relays on Georges #321 GPIO card.
It was quite easy since the raspberry pi on the #310 card already had a
flow ready to go.
Now the fun will begin to learn how to load all of the different flows
and set it up for my liking.
Rich - N5ZC
toggle quoted message
Show quoted text
On 3/23/2025 4:54 PM, Raymer, Timothy -- N0UI via groups.io wrote:
Rich:
From the Group web page, (/g/nodered-hamradio
</g/nodered-hamradio>)?there is a section on the left
hand page that has links: (/g/nodered-hamradio/files
</g/nodered-hamradio/files>)
the file structure will let you pick Flows by Type, (/
g/nodered-hamradio/files/%211%21%20Flows%20by%20Type </
g/nodered-hamradio/files/%211%21%20Flows%20by%20Type>)
and then you can drill down on ROTATORS(/g/nodered-
hamradio/files/%211%21%20Flows%20by%20Type/ROTORS) </g/
nodered-hamradio/files/%211%21%20Flows%20by%20Type/ROTORS>
to find the files for your device.? You will also find folders for Flex
Radio Flows as well as Flex Radio flows under the RADIOS folder.
Good luck!? Let us know how things go.
Tim
73 de N0UI
