开云体育

Thanks Patrick I have a flow mostly working and allows tracking the Flex TX freq. please send yours and I’ll check it out. 73 Dave wo2x Sent from my waxed string and tin cans.

I've got one for you. I'm at work at the moment, but I'll post one this evening.

Dear OMs I am one of the early prototypes who went into REMOTE op.first via various Skype/VNC and evolved into Flex6300 and ex.military FLP PA with 10 electromechanical memories , various 6:2 and RX

Hi all I had modified a SteppIR flow 2 1/2 yrs ago for a MonstIR at the remote station in Hawaii. It worked great! Stupid me never made a good backup after the work I did. Anyone have a copy I sent

Hi All, Has the Pi5 GPIO issue been resolved? I checked the RPi forum and most of the topics are dated with February 2025 indicating the issue may be ongoing. I'm finding GPIO inputs to be very

Hello, can anyone share an example of how to switch antennas in the Flexradio ? Regards, Ondra -- 73 Ondra OK1CDJ https://x.com/ok1cdj http://blog.ok1cdj.com

To add to Alan’s post: The command will choose a relay group in the OM module. When you create the first group, it is number 1. You must remember the order that you created the groups so you know

DD2ML, it occurred to me you may not be using one of the Antenna Genius Flows from this group, such as the WO2X Ag flow. ? ?If you are, just tie the link from the OM flow command to the input of the

DD2ML First, you need to set up the Antenna Genius "Sets" that define the relay to operate. ?Perhaps you already have done this since you say the AG utility is now used to switch your stack match.

Warren, I tried the site setting on the site info button and actually I prefer it to navigating the default settings.? Thx for the tip. Regards

Tony, I can assist eithnthe SPE and ERC flows when you're ready. Ron WB2WGH [email protected]> wrote:

Hi Scott and Ron, I have seen and downloaded the SPE( I have 1.5) flows. I have not set those up yet, nor have I looked for the ERC flow yet. I spent a ton of time and frustration trying to get the

Your best bet is probably going to be to talk to Thetis with Node-RED and let Thetis talk to the HL2. I have done this with another HL2 client called deskHPSDR ( https://github.com/dl1bz/deskhpsdr ),

Thanks Mick and Marty. I did as you suggested and now it is working. Not sure why it was necessary to add the IP address when I checked the default allow sound. Anyway, now working as it should. And

Spot on target Mick, I was about to add that you can access the site settings by clicking to the left of the URL (the Not secure button in this case)? ?Often websites will prompt you to start Chrome

Arnie, I am the author of the code you are referring to.? I originally took the basic Blitortung.org flow and added the mechanized key lookup as well as the lightning alert indicator with a audio

Tony, I have a flow for the SPE (supports 1.3, 1.5 and 2K) in the files section. Flows also exist for the ERC-4 and I am using one based on one downloaded from the site. Ron WB2WGH

Good Evening As the title says; I was hoping to find something for the HL2+ and extras. My shack has multiple radios. The HL2+ is connected to a Hardrock 50 then fed into an SPE Expert. This all

Arnie I just ran a couple of tests with the inject of text to audio out and it played on safari and chrome on my macbook. Marty

Thank you. I did post in inquiry. I hope someone with knowhow will respond. 73 de Arnie W8DU