开云体育

Warren, I tried the site setting on the site info button and actually I prefer it to navigating the default settings.? Thx for the tip. Regards

Tony, I can assist eithnthe SPE and ERC flows when you're ready. Ron WB2WGH [email protected]> wrote:

Hi Scott and Ron, I have seen and downloaded the SPE( I have 1.5) flows. I have not set those up yet, nor have I looked for the ERC flow yet. I spent a ton of time and frustration trying to get the

Your best bet is probably going to be to talk to Thetis with Node-RED and let Thetis talk to the HL2. I have done this with another HL2 client called deskHPSDR ( https://github.com/dl1bz/deskhpsdr ),

Thanks Mick and Marty. I did as you suggested and now it is working. Not sure why it was necessary to add the IP address when I checked the default allow sound. Anyway, now working as it should. And

Spot on target Mick, I was about to add that you can access the site settings by clicking to the left of the URL (the Not secure button in this case)? ?Often websites will prompt you to start Chrome

Arnie, I am the author of the code you are referring to.? I originally took the basic Blitortung.org flow and added the mechanized key lookup as well as the lightning alert indicator with a audio

Tony, I have a flow for the SPE (supports 1.3, 1.5 and 2K) in the files section. Flows also exist for the ERC-4 and I am using one based on one downloaded from the site. Ron WB2WGH

Good Evening As the title says; I was hoping to find something for the HL2+ and extras. My shack has multiple radios. The HL2+ is connected to a Hardrock 50 then fed into an SPE Expert. This all

Arnie I just ran a couple of tests with the inject of text to audio out and it played on safari and chrome on my macbook. Marty

Thank you. I did post in inquiry. I hope someone with knowhow will respond. 73 de Arnie W8DU

Try the maintainers on this page https://flows.nodered.org/node/node-red-dashboard Also is the contribute version of help? Marty

Marty: I went to the info page but do not see any info on the author. This node was part of the node-red-dashboard install. How would I find contact info for the author? Tnx de Arnie W8DU

Thanks Marty. Good suggestion. I will try that. 73 de Arnie W8DU

Thanks Leslie. Yes I have. Since this is happening on all of the computers I have that run Chrome, and that includes W10, W11, Linux and MacOS, but not other browsers, I think the issue is with Chrome

Open a ticket with the node author. Go to info page of the node. Marty

Have you looked to see if there are any extensions in your Chrome Browser. I've seen extensions do strange stuff. I also assume you have deleted cookies and cache.. Les K7LES [email protected]>

No dice. I have tried it on a Macbook Chrome, Linux Mint Chrome as well as a few other W10 and W11 machines. None will talk from the Audio Out node. I have also tried using Safari and Firefox as well

Oops...I stand corrected. I do hear the sound from your demo. I forgot that I had my speaker turned down because I was working some FT8 a little while ago. Sorry about the confusion. But....I still

Node Red does not need much horsepower. I am using it for station control and running it on a RPi Zero2W. It runs just fine on this minimal RPi! GL de Arnie W8DU