开云体育

Two paths. One has the delay, the other is direct from your controlling element. Don't get hung up on the "wires" are like real wires. They carry brief messages, differing in time. Warren, KD4Z wrote:

See below. ?Copy the code and import into your flow. Alan. WA9WUD Code: [ { "id": "de0453294fdfa715", "type": "inject", "z": "afa2042cd231132d", "name": "", "props": [ { "p": "payload" }, { "p":

Working on my first node-red project and have a simple question. What I am trying to accomplish is a turn on delay of 100 ms, but when I turn off the relay I want it to be instant. I'm using the delay

It's a bit blurry.? Can you post just the right hand side?? Not sure why my stats are not incrementing.

I just updated the system and maintenance firmware on mine so the ping stats reset. Dave wo2x Sent: Tuesday, August 10, 2021 8:34 AM To: [email protected] Subject: [nodered-hamradio] Digital

Not really a Node Red topic, but could probably be turned into one. Can someone take a screen shot of their Digital Loggers auto ping screen and post it here?? I set mine up and it was working.? My

Randy, For once the planets aligned for me.? Just got done building and installing a ERC-4 in my Tailtwister control. I've been using NR for many years and thought, "I wonder if someone has made a

If you set initialize pin state under gpio it will have the correct state on node red startup regardless of flow. -- Tormod Brunsby

Thank You.? That did what I needed, Alan.? And having the screen image was very helpful.? Perhaps you were describing the same thing Dave.? I didn't understand what was meant by an object node.

Alan: THANKS for the color-coded SWR text flow !? Works perfectly. I'm playing around with a real simplified Dash window that just shows output power and swr for when I just want to see those things

Warren: That would be TOO cool. Having the KPA500 show up on the Maestro or SSDR would be awesome. Charlie KB8CR

I’d contribute. If you build it, they will come!

Here is the link to the Zoom I hosted. Kyle https://youtu.be/rq8EEiv9xPA

The following files have been uploaded to the Files area of the [email protected] group. * /VK1OO Flows/VK1OO 2021_08_08 Pi Monitoring flows.json (

It sounds like the EEPROM on the Pi4 needs repaired, it is a simple process and here is link to a Youtube video describing how to do that. https://youtu.be/Pxwws-nLQ-A -- Mark - K8MHW

On the Pi4 you can create an image by using the built-in system backup and copier utility on the Pi's desktop, It can easily copy to a USB thumb drive or to a USB SDCard adapter. This will also let

You will need to update the board’s firmware. Also check the SD card if is not corrupted. Here is the pre compiled binaries https://github.com/raspberrypi/firmware 73, Ez

Nick You might tinker with the width setting and spread it out wide. Here is an example of what I'm working on right now. It's a full on radio system controller for a DXpedition station in a box,

Santiago Were you able to resolve your problem? ?If you need a zoom, for help, we can arrange. As for downloading new Raspberry Pi images, I have had good results using the official Raspberry Imager.

GM All I wanted to thank Dave WO2X for all the work he did on the QST article for NodeRed that just was published. Nice job!!! With that article, there is a reference to this group, so I expect a