开云体育

I really wish Node Red would put in better dashboard support.? Lining up groups and spacing them where you want is not obvious.? The current setup is great if you have one row of groupings, but once

I haven’t tried it but the default dash is 48x48. You can change that. Also saw an interesting alternative for a dash for those that know web page programming. Looks a lot more powerful with full

Hi The dash board has limited space , has anyone find a way to fill the whole dashboard? with scroll bar to the side . Instead having links can i have everything on page on ? -- Nick W7NIK

Domenick For my GPIO based relay flow, to "initialize" a relay on Node-Red restart, just change one of the "Test" inject nodes to inject one second after start. ?This will position the relay and

For automatic just use an object node to send Boolean false. Connect it to all the Pi relay GPIO outs. Set the inject to send once after 5 second then interval to never. When you start the Node Red

Hello.? My goal is to initialize relays at the startup of the RasPi.? Automatically,, when RasPi starts up would be great.? But I can work with a solution which would be a dashboard button, called

Hi Nick.? Yes I did add a map like Dave did.? I have uploaded my most recent versions of Rotator_20210806.json and Map_Interface_20210806.json to my wb0smx_Flows/ERC_AzMap directory (Note** Moved to

wb0smx <rdpecken@...> added folder */wb0smx Flows/ERC_AzMap* --- The following files have been uploaded to the Files area of the [email protected] group. * /wb0smx

Working on Mike's idea of a global MQTT broker to share data. Is there any interest? If so, what data is of interest? ?Seems like data similar to what is now "spotted" on DX servers would be a

Does anyone have a working flow to control and load frequency data to an Alpha 87a amplifier?

Randy thank you for the flow, did you add an Azimuthal map . I was trying? to add a? map like? Dave did, but his flow required? PstrotatorAZ . any ideas ? I works great , -- Nick W7NIK

Lost it gone

I’m in. Thanks to someone! tnx Mike / W5JR Alpharetta GA

Me too, dropped can't get back in

I appear to be in the waiting room. tnx Mike / W5JR Alpharetta GA

Thanks, Mike. For this project, I wanted to try running Linux WSJT-X. I have repurposed an i5 NUC to Linux Ubuntu, and am using that to run my Node-Red station, and now WSJT-X. I want to compare

Have you tried a different image writer?? I had the same problem and used a different image writer and all was fine.? You might also want to re-download another image just to make sure it's not

Yes, I will record it and either Dave or I will put it on our YouTube channels.

Before you know it, we will have a Linux client for a FlexRadio if you guys keep this up. Nice work, Mike va3mw wrote:

I added a second Linux nDAX / nCAT Node-Red flow to add an optional second instance. Here is the dashboard. ?There are selectors for "Instance One" and Instance Two" to select Slice and DAX channel.