开云体育

Anyone who needs a new azimuth map for their rotor flow, emIl me. wo2x at arrl dot net Sent from my waxed string and tin cans.

Hi Randy I finally got this going. Took me a bit to work out that with my ERC-M set up to use GS-232B, I needed to change some nodes so that the trim and? parsing used + not AZ= Anyway, working now

I use a 12V relays and a P&B DPST relay. They look sort of like this [image: image.png] Mike va3mw wrote:

Her you go! https://youtu.be/rq8EEiv9xPA Dave wo2x

Hi, Does anyon have the YouTube address for the recording of this beginners session? Thanks, Phil W0OJ

Dave spent several hours with me on Teamviewer helping me find the problems with my dashboard... After many changes we got it all working.? I do have one last item to fix..... my rotor map shows me

Damn Alan, you are supposed to be relaxing! I got sidetracked with modifying the 2x8 flow for someone to support the 4O3A OM module. Haven’t started the rotor flow modification. That will be

You can edit the dashboard text node. Double click it to open it and change the name to what you want. The dashboard nodes are the blueish nodes. See pic below. These can be edited to appear as you

Joe Double click on the Antenna Button, you want to changes. ?Revise the "Label" as shown below. Some other buttons have an in-line configuration function for the labels, but not so in this case.

Yes, a bunch of guys have been “rolling their own” using 240 volt contactors with either 12 volt or 120 volt coils. Important Safety tip! If you are unsure or just want to be safe, you can have a

Hi all, I have been looking how to change the antenna name on the HF-Auto flow. The default port one is showing as Dummy load on the UI page. I must be missing a setting in the flow to change this

I used a Webrelay and then installed a 25 amp contractor in 4 by 4 handy box with SO 10 ga in and out. 12 volt coil so on my other 12 volt devices had it anyway!

Thanks! We should be seeing new users as some get QST and get interested in Node Red. I was working this afternoon on integration of the 4O3A OM module into the 2x8 antenna switch flow. Since there

I need a web based switch to turn my amp on and off with. Any ides would be great. -- 73, Ed KA9EES

Great article, Mike and Dave !! Charlie KB8CR

I would recommend attaching secondary storage and then using restic <http://restic.net> to manage backups of the system to that. It will make good use of the space and will give you not only the

Mike, I've been using a script for years to do this. I find just making a clone of the running Pi is more convenient as it ends up making a run-able SD card in the process. All you need is a USB

This video is the method that works from the GUI desktop. You can do "Timeshift" from the terminal. Alan

Hi Tyler I should do that as well! :). Just boot from an old USB Drive. Mike [email protected]> wrote:

Thanks.... working now