开云体育

For example , i just assigned 1/4w resistor footprint to 1/2w resistor. since i dont have 1/2w resistor footprint. then after reading the netlist in pcbnew. i go in to edit model of 1/4w resistot

Hi, You probably wanted to say "was het juist pech dat (2011-01-22 BZR 2754)-stabiel op Windows de allereerste keer opstartte in het Nederlands?" , In our country (Belgium) it pays to be bi- tri- or

Might try to use a text editor and modify the layers by search and replace. ...Jim

Select the graphic with a right click, select edit, change the layer in the drop down. The only problem is that you may have to select each line individually. This is one time where diving into the

Anyone want to take a stab at answering this one?

Was it just my bad luck that (2011-01-22 BZR 2754)-stable on Windows fired up in (I think) Dutch the first time I ran it? Or as Google would put it "Was het gewoon mijn pech dat (2011-01-22 BZR 2754)

How do I make a 4 layor board from a 2 layor design after routing it? I would like to route 2 layors a buffer and surface mount connectors the 2nd surface mount connector would go to a plate below

Whats new features added in KiCad Version: (2011-01-22 BZR 2754)-stable Build: wxWidgets 2.9.1 (wchar_t,compiler with C++ ABI 1002,GCC 4.4.0,wx containers,compatible with 2.8) Platform: Windows XP

I created a HTML summary of all the parts used in LTSPICE. This will allow you to see if the node sequence for each part needs to be tweaked. Steps to do: 0.) Add this text to your schematic: -PSPICE

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the kicad-users group. File : /LTSpiceHelp/LTSpicePartListAPI.html Uploaded by :

My previous package (Boardmaker/Boardcapture 2) allowed automatic reannotation of the PCB based on module position. This could then be back annotated to the schematic using a reference "was is" file.

Hi Did you manage with the switch? I have a one I can send if you want - but like. Cheers John

Not specific to Kicad, but generally if you have problems with some software in Vista and W7, try an install outside of program files, that gets around some of the features of Vista and W7 regarding

Thanks for the update. I keep telling myself that I'll really use this tool some day "real soon now" but life keeps getting in the way. Donald. -- *Plain Text* email -- it's an accessibility issue ()

Since I executed all executables by hand KiCad can now find them, so it works now. With windows 7 its maybe better to split user/lib stuff from the program stuff like in Linux. Than you don't need

Hi Charles I didnt realise we couldnt use spaces . Such a simple fault that causes it to fail completely . Your cure of course worked perfectly, and I am grateful to you for your help . Now I can

It might be looking for it in the X64 folder. instead of the X86 one. That is if there is a X64 folder. As i understand it 32 bit programs go into the X86 folder and 64 bit ones into the X64 folder,

Hi, don't use spaces in pin names. Ser in => Ser_in Ser out => Ser_out regards, Charles.

I have been trying to build some library parts ( picaxe chips) with the QuickLib Generator. Some of them worked fine but some failed with the eescheema report.... Library<20X2> component load error