¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
RX-only HF mod?
Hey all, just found this group. Maybe this is a stupid question but bear with me. Is there a way to get RX-only on HF (or disable TX on the the antenna port)? I don¡¯t use HF much in my 847 and got
By KB0GGS John · #680 ·
Re: FT847 160 and 80 MHz
That rather sounds like previous owner had a tuner with it, and could explain error signal. Radio was looking for something not there. Unfortunate you had loaded memories before resetting.
By Andy Bosworth · #679 ·
Re: FT847 160 and 80 MHz
Dennis , No, not in satellite mode, but working now ? Jeff E M0UHF ?? ________________________________ Sent: Sunday, October 16, 2022 7:16:19 AM To: [email protected]
By Jeff M0UHF · #678 ·
Re: FT847 160 and 80 MHz
Good morning Andy, Denis and others. I have a bit the bullet and decided to copy my memories and manually re-write them. I reset the radio. Using menu, 35 as the manual suggests. And Not turning the
By Jeff M0UHF · #677 ·
Re: FT847 160 and 80 MHz
By any chance is the rig in Satellite mode ? 73 Dennis VE3XC
By Dennis Surek · #676 ·
Re: FT847 160 and 80 MHz
I don't think it is possible to do a partial reset to retain memories. You can do a reset to delete memories, but retain settings, but not the other way around. Time to get out a pencil and paper and
By Andy Bosworth · #675 ·
Re: FT847 160 and 80 MHz
? Hi Andy, I haven¡¯t done a reset yet, but I wanted to do a partial reset, but I¡¯m not sure how to do that just yet as I want to keep the memories I have just put in manually. Thanks for your
By Jeff M0UHF · #674 ·
Re: FT847 160 and 80 MHz
Hi Andy, I haven¡¯t done a reset yet, but I wanted to do a partial reset, but I¡¯m not sure how to do that just yet as I want to keep the memories I have just put in manually. Thanks for your
By Jeff M0UHF · #673 ·
Re: FT847 160 and 80 MHz
Hi Jeff, normally shows error when trying to tx out of band as you say. Have you done a reset, that quite often cures things. Power off, FAST and LOCK held in, power on. See if that cures it. It may
By Andy Bosworth · #672 ·
Re: FT847 160 and 80 MHz
I¡¯m not sure about the question you are asking me I have put this frequency in the title and in the message 160 m and 80 m. The error appears across the screen as if it was out of band as it would,
By Jeff M0UHF · #671 ·
Re: FT847 160 and 80 MHz
More information needed. Where does it show error? On what frequencies?
By Andy Bosworth · #670 ·
FT847 160 and 80 MHz
Hi, I have just received a ft847 and I have noticed it does not work and shows error as if it was out of band on 160m and 80m. Please can somebody advise.
By Jeff M0UHF · #669 ·
Re: Distorted audio signal on shortwave (rx!)
I have always used an extension speaker with my 847, far bettwer quality. Leighton. GW3FSP.
By gw3fsp · #668 ·
Re: Distorted audio signal on shortwave (rx!)
I found the solution: the internal speaker is "a kind of" defect. By pluging in an external speaker, no distortions are there. Thank you all for helping me. I have another problem with that trcv but I
By Tom DJ6TB · #667 ·
Re: Speech Processor
It does work quite well
By Max Donoghue <ve3tmt@...> · #666 ·
Re: Speech Processor
On or off I mean Get Outlook for Android
By Andrew Lenton · #665 ·
Re: Speech Processor
Correct connor off Get Outlook for Android
By Andrew Lenton · #664 ·
Speech Processor
Is the speech processor just on/off? I don't see anywhere to adjust the compression level.? Thanks
By Steve K9CZ · #663 ·
Re: Discriminator Meter Off Center
Max, Yes, I was looking at one of those Kuhne electronic QH40A Cyrstal heaters something like you have. I was worried about the trimmer also being a problem,? so thought kill 2 birds with one stone
By Steve K9CZ · #662 ·
Re: Discriminator Meter Off Center
I installed one of these on X1001 crystal https://www.ebay.com/itm/284785374391 Works quite well. Max
By Max Donoghue <ve3tmt@...> · #661 ·