开云体育

As a last ditch resort before replacing the pot, I have dismantled them before and given them a clean. Generally the wiper either gets corrosion on it or it's just general dirt buildup (use switch

I had that problem, try cleaning the track in the pot, dribble some cleaner (alcohol say) down the shaft with the set on it's back with the knob off, if that does not work it's a replacement pot

Hi FT-847 users, I have the problem with my FT-847 that with FM the squelch closes a little, but when turning the knob further to the right, the squelch opens again. If the squelch knob were a clock

Very useful Thanks BR Andrew Get Outlook for Android

CatRadio 1.3.0 is now available for download https://www.pianetaradio.it/blog/catradio/ Main changes: * Radio info * Dark theme * MIC levels * NB2 * Meter COMP, ID, VDD * Yaesu band stack * Hamlib 4.5

I am having the same problem now that GREENCUBE is on my RADAR.? Tonight I figured out that I can operate regular, non SAT mode, and go SPLIT.? ?The PstRotator controls the receive doppler and I

Hello Spence and Dave, Yes it's the plastic decal for the Sat control. Regards Stuart Vk5ade

I think it’s the stick on plastic decal about the Sat controls.? De Spence M0STO Sent while portable! please excuse typos.

Hi, Stuart, Im not sure what you are seeking recently. I acquired an FT-847 and it came with copies of the Operating Manual and Technical Manual. Could you please explain what I should look for? BTW,

Hello Group, I am new to this group. I am trying to track down a FT847 RA0070300 SHEET this is the Satelite label. I moved QTH some time ago and it came of in transit. It is only a cosmetic issue but

To add to that, do not attempt to work the satellites until you can hear your own voice coming down from the satellite. Bill K2WH Sent: Sunday, November 20, 2022 8:00 AM To: [email protected]

I used to use an ft847 and the sat mode is a special mode designed to be used only when doing qso’s via satellite. The mode provides automatic frequency tracking to track the satellites as they

You'd have to run in split mode if you want tx/rx on the same band.

On VHF the cavities are the size of beer barrels! And you would need 4-6 depending on split Sent: 20 November 2022 11:12 To: [email protected] Subject: Re: [YaesuFT847] TX/RX same band in Satellite

HI Andy Needless to put it in SAT if on the same band, at most use VFO A and B and not SAT mode. Is there any option in SAT mode that you would miss in normal mode except full duplex which on the same

Not at the same time. Links: ------ [1] /g/YaesuFT847/message/685 [2] /mt/95144276/1045683 [3] /g/YaesuFT847/post [4]

Is it possible to transmit and receive in the same band when in Satellite mode? Thanks, Andy

Thanks guys, sounds like it might not be worth the trouble. The idea is to use a secondary receiver with the 3000, not instead of it. Why? Might be handy in contests, but mostly just because it’s

I tend to agree here, the FT 847 was never the best for HF, you could change all the pin diodes, you could also fit 10 to 15dB attenuator, this will help on RX, and also help when the Tx is on the

I believe that applying 5 volts to pin 8 of the tuner socket will inhibit TX. I am at a loss though to understand why you? would want to use the 847 for RX, when the 3000 is arguably better at RX on