Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
That¡¯s great George! I haven¡¯t had my scope out in months due to a back injury. I am hoping to do so in a few weeks
By
Mike
·
#6396
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
I finally had a night I could try out my own driver! I verified that move axis, syncing, and getting scope status + position worked. I couldn't get GOTO working, but Gary and Peter reminded me I need
By
George Hilios
·
#6395
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Alex: I am sorry for the delayed response to your post.? I initially tried POTH with Peter's driver, with the same (non-)results.? During our conversations, Peter suggested I try ASCOM Device Hub.
By
Paul Abel
·
#6394
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Hi Gary, It has been a very long time since we have had conversation. Good to hear from you. Congratulation on your upcoming retirement. So, you think you are busy now, wait until you fully retire. I
By
bobrose500
·
#6393
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Bob, Good to hear from you - long time no hear, I hope you are doing well. So there are 2 ports on the ServoCAT but they are not the same protocol - they are not even the same purpose. One is for the
By
K9RX - Gary
·
#6392
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Paul, very strange to have two connections sharing the same protocol. Seems like a recipe for disaster. Many moons ago when I had the Gen1 SC I was testing some beta software that allowed a Windows CE
By
bobrose500
·
#6391
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Bob: When I am not connected to the PC and am just using the Nexus DSC to control the SC, there are two wired connections between the Nexus and SC: 1.? Nexus USB port to SC USB port 2.? Nexus Serial
By
Paul Abel
·
#6390
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Paul are you saying that the Nexus has two connection to the SC?. Bob Sent: Saturday, April 16, 2022 1:20 PM To: [email protected] Subject: Re: [ServoCAT] Has Anyone Successfully Connected to/Used a
By
bobrose500
·
#6389
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Hi Bob.? Thanks for your suggestions.? What I did not disclose in my original post, because it would add unwanted complications, is that what you described was how I initially attempted to connect
By
Paul Abel
·
#6388
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Richard, here is the link to v0.7.0.0 of George's ASCOM driver.? https://github.com/ghilios/ASCOM.ghilios.ServoCAT/releases As noted in my original posting, I would be very interested to learn if you
By
Paul Abel
·
#6387
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Paul, The topography you have implemented is the same as what you would use on the Argo Navis and it looks like what is described in the Nexus manual in the Motor driven telescopes section. However in
By
bobrose500
·
#6386
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
George, This sounds great. ?Plate solving would be a huge upgrade for me. Is there a link to download your driver? Thank-you for producing this driver. Richard Miller
By
Richard
·
#6385
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
This ServoCAT ASCOM driver is fully featured, and makes do with the limitations inherent in the SC as much as possible. The features include: * Runs as a server, so connections from multiple
By
George Hilios
·
#6384
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
George, Please summarize the features of your new ascom driver. I currently use the old driver and enjoy remote observing with Stellarium and my dob and ServoCAT¡ªafter I do the two star alignment on
By
Richard
·
#6383
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
Unfortunately, I have yet to try the new Ascom driver with my 20" and Gen2 Servocat, but I hope to over the next few months, which I know doesn't help you now. With that said have you tried the Ascom
By
Alex Z.
·
#6382
·
|
Re: Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
I just released v0.7.0.0 which addresses the remaining ASCOM Conformance issues. Please don't hesitate to reach out if you run into issues.
By
George Hilios
·
#6381
·
|
Has Anyone Successfully Connected to/Used a ServoCAT ASCOM Driver?
I can really use help from fellow members of this forum to hopefully solve a vexing problem I have been having trying to connect my Gen 3 SC with Peter¡¯s original ASCOM driver and George¡¯s new
By
Paul Abel
·
#6380
·
|
Re: Wireless Handpad doesn¡¯t work
Thank you John!!! That was exactly what happened! Never happened in several years. Now it works again! Thank you! Filippo Da: John Sikora<mailto:john@...> Inviato: luned¨¬ 7 marzo 2022 03:12
By
Filippo Scopelliti
·
#6379
·
|
Re: Wireless Handpad doesn¡¯t work
Open the unit and see if the transmitter component has separated from the mother board. Happened to me. The fix was to just put in a piece of foam to keep it on the board. wrote:
By
John Sikora <john@...>
·
#6378
·
|
Wireless Handpad doesn¡¯t work
Hi Gery, Hi everybody, I kindly ask assistance regarding my wireless handpad that doesn¡¯t work. The lights seem ok, battery should be ok and the wired handpad connected to the wireless unit works
By
Filippo Scopelliti
·
#6377
·
|