开云体育

Mike doesn’t seems to be around Could anyone tells me if the units in his .stl file are in inch or mm ? I could only open this file via paint but then I don’t have the units, ?and the 3D printers

Just as a note: The ASIair is designed to be open to a good share of mounts... and I believe when we get something in place they'll be able to connect to the ServoCAT (no DSC needed, is the plan and

Steven, I think you meant to show his response but only one line was shown - was there more to it? Gary

Ricardo, Hello sir! The ServoCAT protocol 'contains' the Sky Commander protocol - which is only 2 commands - but it is very rich and diverse beyond that. There are indeed more commands and much more

Steve: First please specify WHICH component of the AN/SC system you are connecting to and changing the baud on so others are not confused. I know, as the designer, that you are not talking about the

Hi Ricardo. Here is a question and the answer that I got from ZWO 'Help' my Question: Thu, Apr 25, 8:48?PM (13 days ago) to Support Hi again. Another question. Does Asiair Plus need INDIE software

Thanks Steve, much appreciated. I went on and bite the bullet, and purchased an ASIAir anyway, should get delivered to Argentina in the next weeks so I will be able to perform some tests myself; if I

I apologize, Richard doesn't use the asiair, he uses the Eagle S4. Mickey

Guys this isn't my specialty either, I mean ASI/Zwo products, as I am a dob owner as well. Having looked into the Asiair and zwo products, the ASi Air will only work with ASI products, Celestron and

Hi Gary. I hope something can come of it! As I posted on the servocat forum: I am able to connect to my obsession 15" with AN/SC using: meade as startup with baud rate at 19200 on obsession Digital

Hi Ricardo. We tried using sky commander protocol in both an/sc and Asiair (at the same time) at 9600 and 19200. It seemed to connected once or twice, but never showed my location (as if it really did

I am thinking along the same way as you Steve; I still don't own a ASIAir but considering buying one (see /g/ServoCAT/topic/anybody_tried_servocat/105389837 ) if I can make it work

I’ve tried 9600 with no results. [email protected]> wrote:

Could this be a wrong baudrate issue?

FYI...Yesterday, I did connect AsiAir Plus to AN/SC. It only lasted 3-5 sec then disconnected. While connected ,AsiAir showed my location. it could only get that from the AN/SC? Until then any

is it possible, then, to have Sky SAfari run the AN/SC through SkyFi, AND, have AsiAir Plus, 'along for the ride', run the asi533mc pro camera through its own wifi to get the pix? Steve

and even STAY tuned (not stayed - argh!)

Steve, stayed tuned. We'll see where our efforts get us. Bill is right - at the moment nothing it is not supported by ASIAir. Note however you can control it directly from Sky Safari ("it" being the

I do not believe the AsiAir is compatible with ServoCAT. BC

I have an obsession 15"UC with AN/SC and can't get it to connect properly. I have AsiAir connected directly to USB-B port on SC. Iphone to WIFI to AsiAir Plus. Asi533mc Pro connected directly to