Turned out to be a hardware problem. The Signalink interface has some internal jumpers to configure which signals go on which wires in the cable to the rig. One of the jumpers was loose.
Mark WC5M
toggle quoted message
Show quoted text
--- In dxlab@..., "aa6yq" <aa6yq@...> wrote:
Sounds like a problem with the Signalink driver, Mark. I suggest contacting Signalink's technical support.
73,
Dave, AA6YQ
--- In dxlab@..., "wc5m" <wc5m@> wrote:
I have a problem with WW receive. TX works OK. I am using a Tigertronix Signalink USB interface. I had it working up through last night but when I turned on the computer this morning RX doesn't work. When I open WW config and click on "Soundcard" and then "Receive" it says there is a problem with the sound hardware and to go to Control Panel/Printers and other Hardware and click "Add Hardware". However, when I do that "USB Audio Codec" (the default Signalink software) isn't listed. I've already tried restarting the computer and gone through the setup in the Signalink manual but no joy. HELP!
73,
Mark WC5M
