Hi Dave,
Thankyou for your response... I have re-checked all my settings and am happy to confirm they are all as you state they should be. Still no joy with 'auto populate' the WW Log fields....
73 de Terry, G0TMX.
FIST #1862 - Loc JO02IF. WAB - TL86
Echolink Gateway on 434.475Mhz 110.9hz
Bury St Edmunds, Suffolk, United Kingdom.
toggle quoted message
Show quoted text
----- Original Message -----
From: aa6yq
To: dxlab@...
Sent: Friday, September 04, 2009 7:13 PM
Subject: [dxlab] Re: Pathfinder will not auto populate WW Name & QTH details.
WinWarbler cannot use QRZ.com as a callbook unless both DXKeeper and Pathfinder are running, and the Callbook tab of DXKeeper's Config window is configured for "QRZ.com via Pathfinder".
As a result of changes to QRZ.com last week, the QRZ.com URL on Pathfinder's Config window must be set to
{TargetCallsign}
73,
Dave, AA6YQ
--- In dxlab@..., "g0tmx" <g0tmx@...> wrote:
>
> Hi Gang,
>
> I'm currently running with PF 4.5.7 and WW 6.4.8 and I have run into an issue where upon hitting return from entering a callsign in WW Call Box, the program will not auto populate the name and QTH details from the QRZ lookup performed by Pathfinder. Manually looking at the PF results box, the lookup has been performed without error on QRZ.com. I have seen several references to this in other posts, but am I missing something common in the set up, since the last improvements to DXLab?
>
> 73 de Terry, G0TMX.
>
