¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. DXLab
  2. Topics

WinWarbler configuration problem

wc5m
 

I have a problem with WW receive. TX works OK. I am using a Tigertronix Signalink USB interface. I had it working up through last night but when I turned on the computer this morning RX doesn't work. When I open WW config and click on "Soundcard" and then "Receive" it says there is a problem with the sound hardware and to go to Control Panel/Printers and other Hardware and click "Add Hardware". However, when I do that "USB Audio Codec" (the default Signalink software) isn't listed. I've already tried restarting the computer and gone through the setup in the Signalink manual but no joy. HELP!

73,
Mark WC5M
 

Sounds like a problem with the Signalink driver, Mark. I suggest contacting Signalink's technical support.

73,

Dave, AA6YQ

--- In dxlab@..., "wc5m" <wc5m@...> wrote:

I have a problem with WW receive. TX works OK. I am using a Tigertronix Signalink USB interface. I had it working up through last night but when I turned on the computer this morning RX doesn't work. When I open WW config and click on "Soundcard" and then "Receive" it says there is a problem with the sound hardware and to go to Control Panel/Printers and other Hardware and click "Add Hardware". However, when I do that "USB Audio Codec" (the default Signalink software) isn't listed. I've already tried restarting the computer and gone through the setup in the Signalink manual but no joy. HELP!

73,
Mark WC5M
wc5m
 

Turned out to be a hardware problem. The Signalink interface has some internal jumpers to configure which signals go on which wires in the cable to the rig. One of the jumpers was loose.

Mark WC5M

--- In dxlab@..., "aa6yq" <aa6yq@...> wrote:

Sounds like a problem with the Signalink driver, Mark. I suggest contacting Signalink's technical support.

73,

Dave, AA6YQ

--- In dxlab@..., "wc5m" <wc5m@> wrote:

I have a problem with WW receive. TX works OK. I am using a Tigertronix Signalink USB interface. I had it working up through last night but when I turned on the computer this morning RX doesn't work. When I open WW config and click on "Soundcard" and then "Receive" it says there is a problem with the sound hardware and to go to Control Panel/Printers and other Hardware and click "Add Hardware". However, when I do that "USB Audio Codec" (the default Signalink software) isn't listed. I've already tried restarting the computer and gone through the setup in the Signalink manual but no joy. HELP!

73,
Mark WC5M
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
wc5m
Sent: Saturday, September 05, 2009 11:03 AM
To: dxlab@...
Subject: [dxlab] Re: WinWarbler configuration problem


Turned out to be a hardware problem. The Signalink interface has some
internal jumpers to configure which signals go on which wires in the cable
to the rig. One of the jumpers was loose.

I'm glad that you got it working again, Mark, but I don't understand how
a loose jumper in the interface would cause the Signalink's "USB Audio Code"
to not appear registered as a Windows soundcard.

73,

Dave, AA6YQ


--- In dxlab@..., "aa6yq" <aa6yq@...> wrote:

Sounds like a problem with the Signalink driver, Mark. I suggest
contacting Signalink's technical support.

73,

Dave, AA6YQ

--- In dxlab@..., "wc5m" <wc5m@> wrote:

I have a problem with WW receive. TX works OK. I am using a
Tigertronix Signalink USB interface. I had it working up through last night
but when I turned on the computer this morning RX doesn't work. When I open
WW config and click on "Soundcard" and then "Receive" it says there is a
problem with the sound hardware and to go to Control Panel/Printers and
other Hardware and click "Add Hardware". However, when I do that "USB Audio
Codec" (the default Signalink software) isn't listed. I've already tried
restarting the computer and gone through the setup in the Signalink manual
but no joy. HELP!

73,
Mark WC5M



------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.74/2339 - Release Date: 09/05/09
05:51:00

1 - 4 of 4