开云体育

Does this help? https://www.amazon.com/Replacement-Battery-BAOFENG-UV-100-UV-200/dp/B07SYHQ88Y/ref=sr_1_4?keywords=baofeng+uv-3r+battery&qid=1663702821&sr=8-4

hi! I am looking for a replacement battery for my old UV-3R. it should be a lion battery gb/t 18287-2000 but haven't found it... thanks in advance i2NDT Claudio

KK4IXE, I have been using voice for over a decade. Recently found an interest in using APRS and hope to use it over my Baeofeng coupled to my iPhone. I intend to receive weather and emergency updates

Thanks for letting me know. Went into my profile and took care of it.

Wayne . . . <kf7rcm@...> wrote: (Please use your name at the end of your post so we know who you are.) That's a good price for an entry-level HT radio. I have one and like it. It's not

A version of the UV-5R called the GT-5R has come out on Amazon that apparently is made with a bit more QC. Identical looks. It is touted that it is "legal" and won't bleed into the rest of the RF

Permission to repost from Jim of: /g/nanovna-users/messages Many of you will be all over this; while I am not. The VNAs have a great group. It's a $30-60 Smith Chart type

Most the chinese DMR radios, their software all looks the same. The principles are the same. If you look at a video on programming for another model or even another brand and it looks the same as your

I just found a sample codeplug here. https://www.miklor.com/DMR/CodePlugs/CP-Miklor-DMV1.data This should do the trick. Ken

I have tried youtube a few times but never found anything. Could you give me the links for the one your speaking of? Ken

www.youtube.com<http://www.youtube.com> A picture (or video) tells a thousand words. Regards, Doug ________________________________ Sent: Monday, 6 June 2022 11:58 PM To: [email protected]

Would anyone have any experience with this HT using it on DMR Repeaters? A friend picked one up and was asking me if could be programmed to work on DMR Repeaters. I can't find much on this HT.? I

That's not good enough :-) ... but that is what I have done.

How about rearranging the memory channels so the one you want will be the one it defaults to instead of trying to tell it to use memory X? Would that be good enough? Donald KX8K

Everything is in the same place. MR A channel is set to 1, MR B channel is set to 4. On start up the radio usually goes to 0, but sometimes some other channel but B goes to 4.

I did a full reset on the radio. Twice. Switched from Chinese to English. I downloaded from the radio after reset. I opened the old file and copied only the channels to the to the DLed file and then

Hi Rick, In CHIRP, select the "settings" tab on the left side of the screen, then select "work mode settings". There are (should be) two fields labeled "MR A Channel" and "MR B Channel" . These are

Rick . . . Just want to be sure of this as it would make a difference if you didn't do this. Before copying from another CHIRP file into the one for your current radio, did you first download the

I did a full reset and then copied the channels from another Chirp file. Same results.

Those are set.