开云体育

www.youtube.com<http://www.youtube.com> A picture (or video) tells a thousand words. Regards, Doug ________________________________ Sent: Monday, 6 June 2022 11:58 PM To: [email protected]

Would anyone have any experience with this HT using it on DMR Repeaters? A friend picked one up and was asking me if could be programmed to work on DMR Repeaters. I can't find much on this HT.? I

That's not good enough :-) ... but that is what I have done.

How about rearranging the memory channels so the one you want will be the one it defaults to instead of trying to tell it to use memory X? Would that be good enough? Donald KX8K

Everything is in the same place. MR A channel is set to 1, MR B channel is set to 4. On start up the radio usually goes to 0, but sometimes some other channel but B goes to 4.

I did a full reset on the radio. Twice. Switched from Chinese to English. I downloaded from the radio after reset. I opened the old file and copied only the channels to the to the DLed file and then

Hi Rick, In CHIRP, select the "settings" tab on the left side of the screen, then select "work mode settings". There are (should be) two fields labeled "MR A Channel" and "MR B Channel" . These are

Rick . . . Just want to be sure of this as it would make a difference if you didn't do this. Before copying from another CHIRP file into the one for your current radio, did you first download the

I did a full reset and then copied the channels from another Chirp file. Same results.

Those are set.

I'm not in front of my pc at the moment, but I think Chirp has fields for the power-on channels.

My BF-F8+ starts up on random channels. It usually starts on channel 0 even though it is almost always on channel 1 when I turn it off. I'd like it to start on 1. Anyone have any? idea how to fix

All. Ok thanks...? I guess it is the way it is. Thanks Skip

I can tell you, you will NOT find a schematic. I have tried to abtain one to repair a friends radio. The power level and frequency range is software Controlled. You can not adjust the frequencies or

Ok. Makes sense. But maybe a schematic? Skip

To my knowledge the service manual is not available to the public. They don’t expect anyone to try to repair cheap radios and compared to the big name brands the are VERY cheap! They work great, but

A couple of questions? Does anyone have a service manual?? Need to adjust power output lower in bands.. Also... Anyway to make this RX on the AM airband Skip

Hello Chuck, Read all about it here..... http://www.miklor.com/UV82/ Regards, Doug VK2XLJ ________________________________ Sent: Wednesday, 4 May 2022 12:17 AM To: [email protected]

Chuck . . . You can read the CHIRP documentation (it is in the files section of the CHIRP group or on the CHIRP website). The thing that may not be intuitive is that you first have to download the

I purchased a UV-82 at a Hamfest this past weekend and I have a question about programming it with Chirp running on my relatively new Dell laptop using Windows 11. Are there any "gotcha's" I should be