Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
I "assume" he means reporting it as fraud to the credit card company
that was used to make the purchase.? That process can be a PITA.?
Going down this road is straying way off topic. So, no more post
from me.
Stan
On 3/21/22 21:23, Miket_NYC wrote:
toggle quoted message
Show quoted text
"Report it as fraud if they refuse."
Report it to whom?
Mike Taglieri?
On Mon, Mar 21, 2022, 6:57
PM Lonnie Hutchinson < chinacat@...>
wrote:
Amazon,
eBay, Walmart, etc all play this game. The best way to
tell
who is selling you an item is to look at who the funds
were
transferred to. I don't use Walmart, so can't say for
sure, but both
Amazon and eBay process the payments themselves...my card
shows a
payment to eBay or Amazon. They do this in order to take
their cut of
the sale. I view it as them shooting themselves in the
foot because my
financial statement says I purchased an item from
eBay/Amazon and when
I talk to their support I am very clear that *they* sold
me the item
since *they* took my money, and I have nothing to do with
their
contracts with their "vendors". If they try to say they
aren't the
seller I respond by asking if they are saying the sale was
fraudulent,
since my card says they received the money, and if they
didn't sell
the item I will report the charge as fraudulent.
So, if you buy from and they process
the payment, don't
let them tell you they aren't the seller...all evidence is
that they
are. They do this to try and leave you without recourse
for whatever
the problem is. But, legally speaking, if they take your
money they
have to deliver the product they sold you. If they ever
start
explaining "how it works" say "that's nice, but my credit
card says
you sold me the item and I expect you to support that
sale". Report it
as fraud if they refuse.
On Mon, Mar 21, 2022 at 9:48 AM Bruce J <bruce.desertrat@...>
wrote:
>
> Be aware, all, that most things on sale through
Walmart.com are done via online only affiliation: ie:
Vevor sells their stuff through Walmart’s site passing
along a cut to Walmart, much the same way that Amazon
works. There is no guarantee of anything by Walmart. They
are only providing the marketplace. (this info is in the
fine print)
>
> This is not something being sold BY Walmart.
>
> On Mar 21, 2022, at 9:40 AM, Bill Williams
<BWMSBLDR1@...> wrote:
>
> There is quite a selection of 7X12 and 7X14 lathes
from under $500 and up. I haven’t tried to dig out the
specifications as yet but I would start searching with
those lathes. The 8X lathes seem to me to be a streched
version of the 7X family, increasing capacity without
increasing strength or rigidity. Ever run a lathe that has
been blocked up to increase the swing? It is the home of
chatter!
> The good news here is that Wally World has the
economic clout to ensure a reasonable quality and (I
believe) the marketing expertise to do so. This may herald
a new chapter in story of home model engineering. Stay
tuned!? ?Bill in Boulder CO
>
>
> Sent from Mail for Windows 10
>
> From: Ralph Hulslander
> Sent: Monday, March 21, 2022 09:51
> To: [email protected]
> Subject: Re: [7x12MiniLathe] Check this out – walmart
online shopping vevor lathe - Bing - Shopping
>
> Bill, do you have one that is of interest? There must
be a hundred lathes on that page, some from ebay others
from Walmart.
>
> Ralph
>
> On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...>
wrote:
>
> Check this out fellow campers! If it is from Wally
World it has to be real!? ?Bill in Boulder CO
>
>
>
> walmart online shopping vevor lathe - Bing - Shopping
>
> Sent from Mail for Windows 10
>
>
>
>
> <7A6670F8C4BB494EA47C40DEEF8EDB13.png>
>
>
> --
> Bruce Johnson
>
> "Wherever you go, there you are." B. Banzai, PhD
>
>
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
"Report it as fraud if they refuse."
Report it to whom?
Mike Taglieri?
On Mon, Mar 21, 2022, 6:57 PM Lonnie Hutchinson < chinacat@...> wrote: Amazon, eBay, Walmart, etc all play this game. The best way to tell
who is selling you an item is to look at who the funds were
transferred to. I don't use Walmart, so can't say for sure, but both
Amazon and eBay process the payments themselves...my card shows a
payment to eBay or Amazon. They do this in order to take their cut of
the sale. I view it as them shooting themselves in the foot because my
financial statement says I purchased an item from eBay/Amazon and when
I talk to their support I am very clear that *they* sold me the item
since *they* took my money, and I have nothing to do with their
contracts with their "vendors". If they try to say they aren't the
seller I respond by asking if they are saying the sale was fraudulent,
since my card says they received the money, and if they didn't sell
the item I will report the charge as fraudulent.
So, if you buy from and they process the payment, don't
let them tell you they aren't the seller...all evidence is that they
are. They do this to try and leave you without recourse for whatever
the problem is. But, legally speaking, if they take your money they
have to deliver the product they sold you. If they ever start
explaining "how it works" say "that's nice, but my credit card says
you sold me the item and I expect you to support that sale". Report it
as fraud if they refuse.
On Mon, Mar 21, 2022 at 9:48 AM Bruce J <bruce.desertrat@...> wrote:
>
> Be aware, all, that most things on sale through Walmart.com are done via online only affiliation: ie: Vevor sells their stuff through Walmart’s site passing along a cut to Walmart, much the same way that Amazon works. There is no guarantee of anything by Walmart. They are only providing the marketplace. (this info is in the fine print)
>
> This is not something being sold BY Walmart.
>
> On Mar 21, 2022, at 9:40 AM, Bill Williams <BWMSBLDR1@...> wrote:
>
> There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter!
> The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!? ?Bill in Boulder CO
>
>
> Sent from Mail for Windows 10
>
> From: Ralph Hulslander
> Sent: Monday, March 21, 2022 09:51
> To: [email protected]
> Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping
>
> Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart.
>
> Ralph
>
> On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote:
>
> Check this out fellow campers! If it is from Wally World it has to be real!? ?Bill in Boulder CO
>
>
>
> walmart online shopping vevor lathe - Bing - Shopping
>
> Sent from Mail for Windows 10
>
>
>
>
> <7A6670F8C4BB494EA47C40DEEF8EDB13.png>
>
>
> --
> Bruce Johnson
>
> "Wherever you go, there you are." B. Banzai, PhD
>
>
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Has everyone that bought Cummins lathes been satisfied with them? Would people that were dissatisfied post?? ?Bill in Boulder CO ? Sent from for Windows 10 _._,_._,_ ?
|
Re: Different Prices - such a range-Here is low price on a name brand
I have? a friend who, a couple of years
ago, bought a cheap airline ticket from ATL Ga, to STL Mo, just to
buy a hand full of toys. After the deal he rented a self-driving
rent-a-car and drove back to ATL Ga. so the toys would not be
broken by a shipping company.
.
Maybe a similar deal could be worked up
between a buyer and the seller.
.
Good Luck
On 3/21/2022 12:27 PM, Bill Williams
wrote:
toggle quoted message
Show quoted text
??????????????? Well just to start: this
lathe is located in Arlington Texas, midway between Dallas and
Fort Worth. Not far from the airport if you wanted to fly in
for a look!? ;<O ?As far as can be told from the pictures
it is well equipped and cared for. But there are lots of
things you cannot see. It is worth a day’s drive IMO. On your
scale this could be a 3!?? Bill in Boulder CO
?
Sent from for Windows 10
?
?
I don't know your location so I can not
guess shipping, but,
Here is a low price on a name brand mini
lathe and some accessories.(Not My Auction)
On 3/14/2022 8:35 AM, MZ Rider wrote:
I am thinking of buying a new mini lathe.
The prices however seem to be in a ratio of 1 to 3 from
lowest to highest. This is after making allowances for what
is supplied, which for a basic model, which is all I want is
the gears and a 3 jaw chuck plus a few tools. Currently
cheapest on Amazon Prime in the UK is around ?400 for a 7x12
no DRO. OK for what I want. Yet similar machines seem to go
up to nearer ?1200 from other suppliers.
As far as I can see they look identical. I can deal with the
setting up etc.?
My experiences of cheap and cheerful Chinese products with
a? few exceptions is that so long as one does not expect too
much one will not be disappointed. However a 1:3 price
difference for obviously the same product is not usual.
?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Amazon, eBay, Walmart, etc all play this game. The best way to tell
who is selling you an item is to look at who the funds were
transferred to. I don't use Walmart, so can't say for sure, but both
Amazon and eBay process the payments themselves...my card shows a
payment to eBay or Amazon. They do this in order to take their cut of
the sale. I view it as them shooting themselves in the foot because my
financial statement says I purchased an item from eBay/Amazon and when
I talk to their support I am very clear that *they* sold me the item
since *they* took my money, and I have nothing to do with their
contracts with their "vendors". If they try to say they aren't the
seller I respond by asking if they are saying the sale was fraudulent,
since my card says they received the money, and if they didn't sell
the item I will report the charge as fraudulent.
So, if you buy from walmart.com and they process the payment, don't
let them tell you they aren't the seller...all evidence is that they
are. They do this to try and leave you without recourse for whatever
the problem is. But, legally speaking, if they take your money they
have to deliver the product they sold you. If they ever start
explaining "how it works" say "that's nice, but my credit card says
you sold me the item and I expect you to support that sale". Report it
as fraud if they refuse.
toggle quoted message
Show quoted text
On Mon, Mar 21, 2022 at 9:48 AM Bruce J <bruce.desertrat@...> wrote:
Be aware, all, that most things on sale through Walmart.com are done via online only affiliation: ie: Vevor sells their stuff through Walmart’s site passing along a cut to Walmart, much the same way that Amazon works. There is no guarantee of anything by Walmart. They are only providing the marketplace. (this info is in the fine print)
This is not something being sold BY Walmart.
On Mar 21, 2022, at 9:40 AM, Bill Williams <BWMSBLDR1@...> wrote:
There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter!
The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned! Bill in Boulder CO
Sent from Mail for Windows 10
From: Ralph Hulslander
Sent: Monday, March 21, 2022 09:51
To: [email protected]
Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping
Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart.
Ralph
On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote:
Check this out fellow campers! If it is from Wally World it has to be real! Bill in Boulder CO
walmart online shopping vevor lathe - Bing - Shopping
Sent from Mail for Windows 10
<7A6670F8C4BB494EA47C40DEEF8EDB13.png>
--
Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
This is one of the reasons folks go with the 7x lathes, size and weight. There is no way back when I bought my 7x16 that I could deal with an 8x then or even now.
george
On Monday, March 21, 2022, 11:02:59 AM PDT, Michael Jablonski <michaeljab@...> wrote:
I believe that the 8x is not just a stretched 7x, but a much more robust, rigid lathe than a 7x. The weights indicated support this. 7x14 = Net Weight: 88.18 lbs / 40 kg 8x16 = Item Weight: Item Weight: 180.78 lbs / 82 kg ? Michael - California, USA Micro-Mark MicroLux 7x16 LMS 3990 Hi-Torque Mill with power feed ? ? ? ?
From: [email protected] < [email protected]> On Behalf Of Bill Williams Sent: Monday, March 21, 2022 9:41 AM To: [email protected]Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from for Windows 10 ? From: Ralph Hulslander
Sent: Monday, March 21, 2022 09:51
To: [email protected]
Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from for Windows 10 ?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
? Hoo my? …. ? I stop? reading? all? these ? I do not put? that? budjet on ? ? Sorry ? Stop ?to martyrize me Please ? ? Jack 47 71 ? ? These lathe models are more-or-less on the pattern of the 7x lathes; each 8x model is mainly the same with different bed lengths, ?but they’re distinct designs and and castings from the 7x, but if you look at all the 8x lathes from these manufacturers they all look pretty much the same. They’re generally better made than the 7x ones which were designed from the start as cheap, easy-to-manufacture hobbyist-sized lathes. The 8x ones are the low-end hobby/pro lathes before you get into actual commercial machine shop lathes at the 10” and larger sizes.
toggle quoted message
Show quoted text
On Mar 21, 2022, at 11:02 AM, Michael Jablonski <michaeljab@...> wrote: ? I believe that the 8x is not just a stretched 7x, but a much more robust, rigid lathe than a 7x. The weights indicated support this. 7x14 = Net Weight: 88.18 lbs / 40 kg 8x16 = Item Weight: Item Weight: 180.78 lbs / 82 kg Michael - California, USA LMS 3990 Hi-Torque Mill with power feed There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO Sent from??for Windows 10 From:?Ralph Hulslander
Sent:?Monday, March 21, 2022 09:51
To:?[email protected]
Subject:?Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO walmart online shopping vevor lathe - Bing - Shopping Sent from??for Windows 10
?
--?"Wherever you go, there you are." B. Banzai, PhD ?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
These lathe models are more-or-less on the pattern of the 7x lathes; each 8x model is mainly the same with different bed lengths, ?but they’re distinct designs and and castings from the 7x, but if you look at all the 8x lathes from these manufacturers they all look pretty much the same.
They’re generally better made than the 7x ones which were designed from the start as cheap, easy-to-manufacture hobbyist-sized lathes. The 8x ones are the low-end hobby/pro lathes before you get into actual commercial machine shop lathes at the 10” and larger sizes.
On Mar 21, 2022, at 11:02 AM, Michael Jablonski < michaeljab@...> wrote:
I believe that the 8x is not just a stretched 7x, but a much more robust, rigid lathe than a 7x. The weights indicated support this. 7x14 = Net Weight: 88.18 lbs / 40 kg 8x16 = Item Weight: Item Weight: 180.78 lbs / 82 kg ? Michael - California, USA Micro-Mark MicroLux 7x16 LMS 3990 Hi-Torque Mill with power feed ? ? ? ? ? There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from??for Windows 10 ? From:?Ralph HulslanderSent:?Monday, March 21, 2022 09:51 To:?[email protected]Subject:?Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams < BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from??for Windows 10 ?
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
I believe that the 8x is not just a stretched 7x, but a much more robust, rigid lathe than a 7x. The weights indicated support this. 7x14 = Net Weight: 88.18 lbs / 40 kg 8x16 = Item Weight: Item Weight: 180.78 lbs / 82 kg ? Michael - California, USA Micro-Mark MicroLux 7x16 LMS 3990 Hi-Torque Mill with power feed ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Bill Williams Sent: Monday, March 21, 2022 9:41 AM To: [email protected]Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from for Windows 10 ? From: Ralph Hulslander
Sent: Monday, March 21, 2022 09:51
To: [email protected]
Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from for Windows 10 ?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Well I had to go look, and I bought the Cummins lathe in 2005 and paid $456 for it, shipping included. That's 17 years and I just replaced the belt this last year. It's been a good lathe.
Floyd?
Be aware, all, that most things on sale through ?are done via online only affiliation: ie: Vevor sells their stuff through Walmart’s site passing along a cut to Walmart, much the same way that Amazon works. There is no guarantee of anything by Walmart. They are only providing the marketplace. (this info is in the fine print)?
This is not something being sold BY Walmart.?
On Mar 21, 2022, at 9:40 AM, Bill Williams < BWMSBLDR1@...> wrote:
There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from??for Windows 10 ? From:?Ralph HulslanderSent:?Monday, March 21, 2022 09:51 To:?[email protected]Subject:?Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams < BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from??for Windows 10 ?
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
Re: Different Prices - such a range-Here is low price on a name brand
I have a simular lathe (digital readouts on mine)? Better then 50% off list 4" chucks against 3" on many of the other mini lathes Toggle lock on the tail stock Good selection of quick change tool bits Many things going for it
If I didn't have one, I would be looking at it.
Howard Garner
On Monday, March 21, 2022, 12:27:37 PM EDT, Bill Williams <bwmsbldr1@...> wrote:
??????????????? Well just to start: this lathe is located in Arlington Texas, midway between Dallas and Fort Worth. Not far from the airport if you wanted to fly in for a look!? ;<O ?As far as can be told from the pictures it is well equipped and cared for. But there are lots of things you cannot see. It is worth a day’s drive IMO. On your scale this could be a 3!?? Bill in Boulder CO ? Sent from for Windows 10 ?
From: Jon Rus via groups.ioSent: Monday, March 21, 2022 10:01 To: [email protected]Subject: Re: [7x12MiniLathe] Different Prices - such a range-Here is low price on a name brand ? I don't know your location so I can not guess shipping, but, Here is a low price on a name brand mini lathe and some accessories.(Not My Auction) On 3/14/2022 8:35 AM, MZ Rider wrote: I am thinking of buying a new mini lathe. The prices however seem to be in a ratio of 1 to 3 from lowest to highest. This is after making allowances for what is supplied, which for a basic model, which is all I want is the gears and a 3 jaw chuck plus a few tools. Currently cheapest on Amazon Prime in the UK is around ?400 for a 7x12 no DRO. OK for what I want. Yet similar machines seem to go up to nearer ?1200 from other suppliers.
As far as I can see they look identical. I can deal with the setting up etc.?
My experiences of cheap and cheerful Chinese products with a? few exceptions is that so long as one does not expect too much one will not be disappointed. However a 1:3 price difference for obviously the same product is not usual.
?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Bill, my first mini lathe and mill came from the Cummins traveling circus 20 years ago LOL.? I traded the lathe but still have the mini mill
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Be aware, all, that most things on sale through ?are done via online only affiliation: ie: Vevor sells their stuff through Walmart’s site passing along a cut to Walmart, much the same way that Amazon works. There is no guarantee of anything by Walmart. They are only providing the marketplace. (this info is in the fine print)?
This is not something being sold BY Walmart.?
On Mar 21, 2022, at 9:40 AM, Bill Williams < BWMSBLDR1@...> wrote:
There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from??for Windows 10 ? From:?Ralph HulslanderSent:?Monday, March 21, 2022 09:51 To:?[email protected]Subject:?Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams < BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from??for Windows 10 ?
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
There is quite a selection of 7X12 and 7X14 lathes from under $500 and up. I haven’t tried to dig out the specifications as yet but I would start searching with those lathes. The 8X lathes seem to me to be a streched version of the 7X family, increasing capacity without increasing strength or rigidity. Ever run a lathe that has been blocked up to increase the swing? It is the home of chatter! The good news here is that Wally World has the economic clout to ensure a reasonable quality and (I believe) the marketing expertise to do so. This may herald a new chapter in story of home model engineering. Stay tuned!?? Bill in Boulder CO ? ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ralph HulslanderSent: Monday, March 21, 2022 09:51 To: [email protected]Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? Bill, do you have one that is of interest? There must be a hundred lathes on that page, some from ebay others from Walmart. ? On Mon, Mar 21, 2022 at 11:27 AM Bill Williams <BWMSBLDR1@...> wrote: Check this out fellow campers! If it is from Wally World it has to be real!?? Bill in Boulder CO ? walmart online shopping vevor lathe - Bing - Shopping Sent from for Windows 10 ?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Actually I ordered my lathe online and received?it by shipment through UPS. Did the same thing for a milling machine shortly after that. Floyd
On Mon, Mar 21, 2022 at 10:50 AM Bill Williams < BWMSBLDR1@...> wrote: Floyd, You are the only other person that I know of that bought a Cummins lathe from their traveling circus!?? Bill in Boulder ? Sent from for Windows 10 ? From: Floyd Burkett
Sent: Monday, March 21, 2022 06:00
To: [email protected]
Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? That's actually a very good price for a 7x14 lathe. I paid about that price for a 7x12 cummins many years ago, and it has been a very good machine. Of course?you end up spending that much again for the tooling. ? On Mon, Mar 21, 2022 at 12:17 AM Bill Williams <BWMSBLDR1@...> wrote: walmart online shopping vevor lathe - Bing - Shopping Sent from for Windows 10 ?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
Ralph, that is a triple word score! Bill, with a Scrabble addicted wife! P.S. I realized just now that I have the exact same machines. ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ralph HulslanderSent: Monday, March 21, 2022 09:58 To: [email protected]Subject: Re: [7x12MiniLathe] Check this out – walmart online shopping vevor lathe - Bing - Shopping ? I have a Cummins also! I got it from my neighbor when he decided he was too old to safetly operate his machine tools. I also got my Clausing 8520 verticle mill and a Chraftsman 12x36 lathe and lots of tooling and lots of good stuff. ? ?
|
Re: Different Prices - such a range-Here is low price on a name brand
??????????????? Well just to start: this lathe is located in Arlington Texas, midway between Dallas and Fort Worth. Not far from the airport if you wanted to fly in for a look!? ;<O ?As far as can be told from the pictures it is well equipped and cared for. But there are lots of things you cannot see. It is worth a day’s drive IMO. On your scale this could be a 3!?? Bill in Boulder CO ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Jon Rus via groups.ioSent: Monday, March 21, 2022 10:01 To: [email protected]Subject: Re: [7x12MiniLathe] Different Prices - such a range-Here is low price on a name brand ? I don't know your location so I can not guess shipping, but, Here is a low price on a name brand mini lathe and some accessories.(Not My Auction) On 3/14/2022 8:35 AM, MZ Rider wrote: I am thinking of buying a new mini lathe. The prices however seem to be in a ratio of 1 to 3 from lowest to highest. This is after making allowances for what is supplied, which for a basic model, which is all I want is the gears and a 3 jaw chuck plus a few tools. Currently cheapest on Amazon Prime in the UK is around ?400 for a 7x12 no DRO. OK for what I want. Yet similar machines seem to go up to nearer ?1200 from other suppliers.
As far as I can see they look identical. I can deal with the setting up etc.?
My experiences of cheap and cheerful Chinese products with a? few exceptions is that so long as one does not expect too much one will not be disappointed. However a 1:3 price difference for obviously the same product is not usual.
?
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
I like this one the best -?
It's an 8x32 with a 5" Chuck, for only $1,300.
ralphie
|
Re: Check this out – walmart online shopping vevor lathe - Bing - Shopping
??? ??? I gotto think that Covid hit them pretty hard . I live
outside of a town of @ 2500 in northern CA & they usually stop
by & then spend a day or two at out next big town of @ the
same
population . In the past their prices have been a bit higher than
HF , but it saves a 90 mile round trip .
??? animal
On 3/21/2022 8:38 AM, Bill Williams
wrote:
toggle quoted message
Show quoted text
Floyd, You are the only other person that I
know of that bought a Cummins lathe from their traveling
circus!?? Bill in Boulder
?
Sent from for Windows 10
?
From:
Floyd Burkett
Sent: Monday, March 21, 2022 06:00
To: [email protected]
Subject: Re: [7x12MiniLathe] Check this out –
walmart online shopping vevor lathe - Bing - Shopping
?
That's actually a very good price for a
7x14 lathe. I paid about that price for a 7x12 cummins many
years ago, and it has been a very good machine. Of
course?you end up spending that much again for the tooling.
?
On Mon, Mar 21, 2022 at 12:17 AM Bill
Williams <BWMSBLDR1@...>
wrote:
walmart
online shopping vevor lathe - Bing - Shopping
Sent
from for
Windows 10
?
|
Re: Different Prices - such a range-Here is low price on a name brand
I don't know your location so I can not
guess shipping, but,
.
Here is a low price on a name brand
mini lathe and some accessories.(Not My Auction)
.
Good Luck!
On 3/14/2022 8:35 AM, MZ Rider wrote:
toggle quoted message
Show quoted text
I am thinking of buying a new mini lathe. The prices however seem
to be in a ratio of 1 to 3 from lowest to highest. This is after
making allowances for what is supplied, which for a basic model,
which is all I want is the gears and a 3 jaw chuck plus a few
tools. Currently cheapest on Amazon Prime in the UK is around ?400
for a 7x12 no DRO. OK for what I want. Yet similar machines seem
to go up to nearer ?1200 from other suppliers.
As far as I can see they look identical. I can deal with the
setting up etc.?
My experiences of cheap and cheerful Chinese products with a? few
exceptions is that so long as one does not expect too much one
will not be disappointed. However a 1:3 price difference for
obviously the same product is not usual.
|
ram50v8efi
Ralph Lehotsky