That really IS good! Thanks for the link!
toggle quoted message
Show quoted text
--- In 7x12minilathe@..., "Charles E. Kinzer" <ckinzer@...> wrote:
Found it. It's VERY good.
Here are a couple of others which seem to have the same same key information and look the same, but don't have the Valenite brand information that is in the MSC chart.
So, it turns out Enco has this at:
and you can select html or pdf format.
Chuck K.
----- Original Message -----
From: paul_probus
To: 7x12minilathe@...
Sent: Wednesday, March 07, 2007 10:51 AM
Subject: [SPAM] [7x12minilathe] Re: Carbide Insert Nomenclature?
Correction, the name of the file is:
ANSI_Indexable_Insert_Info_MSC555.pdf
Paul
--- In 7x12minilathe@..., "paul_probus"
<paul_probus@> wrote:
>
> Not sure why, but here you go:
>
> hobbymachineshopfiles
>
> Plug that into Yahoo's search on the Groups homepage and you
should
> get two hits. It's the original group (can't remember if I used
> a "1" at the end of the expansion group or a "2"). Under the
Files
> section, scroll down and it's something to the effect of ANSI
> Carbide Insert Nomenclature.
>
> Sorry about the inconvenience.
>
> Paul
>
> --- In 7x12minilathe@..., "rancerupp" <rupps@> wrote:
> >
> > Paul,
> >
> > Don't think any of us can find the file. What's the Yahoo Group
> name?
> >
> > Rance
> >
> > > > --- In 7x12minilathe@..., "paul_probus"
> <paul_probus@>
> > > > wrote:
> > > > >
> > > > > ... It is one of my groups and you'll have to
> > > > > join before you can see it. ...
> > > > >
> > > > >
> > > > >
> >
>
[Non-text portions of this message have been removed]
