I've been sharing my drill press chuck with my lathe. Besides always
being on the wrong tool, and the key lost somewhere between the two,
this chuck is off center at least .010".
Fortunately, Busy Bee put their 1/2" LFA chuck on sale for $70 (reg
85). But then I noticed they had also put their 1/2" Groz chuck on
for $30 (45). Naturally they also have a few cheapos. I have a few
Groz tools and like them very much, but do you think I should spring
the extra $40 for an LFA?
Thanks for your opinions!
