Yep, it's good and easy to read. However, its tabulated simplicity
is not as complete as it could be. I certainly have unlisted inserts.
OTOH, Machinery's Handbook gives the breakdown of the numeric part
as size, thickness & point radius. That said, either they got it
wrong or not all tip makers properly conform. I have some TCMT732
tips which Machinery's would assert had an inscribed circle of 7/8"
(size=7 in eighths of an inch) whereas they are 1/4". Similarly, the
thickness and point radius don't match. It's not like Machinery's to
be wrong.
Bottom line: Caveat emptor!
John
<clypeaster55@...> wrote:
That really IS good! Thanks for the link!
--- In 7x12minilathe@..., "Charles E. Kinzer"
<ckinzer@> wrote:
Found it. It's VERY good.
Here are a couple of others which seem to have the same same key
information and look the same, but don't have the Valenite brand
information that is in the MSC chart.
So, it turns out Enco has this at:
and
you can select html or pdf format.
Chuck K.
----- Original Message -----
From: paul_probus
To: 7x12minilathe@...
Sent: Wednesday, March 07, 2007 10:51 AM
Subject: [SPAM] [7x12minilathe] Re: Carbide Insert
Nomenclature?
Correction, the name of the file is:
ANSI_Indexable_Insert_Info_MSC555.pdf
Paul
--- In 7x12minilathe@..., "paul_probus"
<paul_probus@> wrote:
>
> Not sure why, but here you go:
>
> hobbymachineshopfiles
>
> Plug that into Yahoo's search on the Groups homepage and you
should
> get two hits. It's the original group (can't remember if I
used
> a "1" at the end of the expansion group or a "2"). Under the
Files
> section, scroll down and it's something to the effect of
ANSI
> Carbide Insert Nomenclature.
>
> Sorry about the inconvenience.
>
> Paul
>
> --- In 7x12minilathe@..., "rancerupp" <rupps@>
wrote:
> >
> > Paul,
> >
> > Don't think any of us can find the file. What's the Yahoo
Group
> name?
> >
> > Rance
> >
> > > > --- In 7x12minilathe@..., "paul_probus"
> <paul_probus@>
> > > > wrote:
> > > > >
> > > > > ... It is one of my groups and you'll have to
> > > > > join before you can see it. ...
> > > > >
> > > > >
> > > > >
> >
>
[Non-text portions of this message have been removed]
