Hello, I was wondering how many P25 capable users we have so we can communicate using this digital voice mode.
I bought an XTS 3000 Model II Motorola Astro HT on eBay, I will not get it for a few days, but it will be programmed before I return to MN early May.
Dave, KE0NA
|
I have 5 UHF P25 radios, + 1 all band(VHF/UHF/700/800/900) and 3, 700/800 All but one are in AZ at the moment. Basically all XTS5000, except for 1 Harris radio.
On Sat, Apr 15, 2023 at 10:52?PM David Ventura < dfujikiv@...> wrote: Hello, I was wondering how many P25 capable users we have so we can communicate using this digital voice mode.
I bought an XTS 3000 Model II Motorola Astro HT on eBay, I will not get it for a few days, but it will be programmed before I return to MN early May.
Dave, KE0NA
|
Me too; I am P25 capable, Dave.
Perhaps a spreadsheet with the P25 radio ID's might be helpful? Not sure.
-matt??
-- ----- Matthew Genelin Computer Engineer mgenelin@... +1 (612) 605-5382
ARS N0YNT/W0USD/W0YC GMRS WQCQ790
NNNNN
|
Hello all,
?
I have a few p25 radios.? Maybe I will get a P25 repeater someday.?
?
Mike? (N0VZC)
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
MattyG
Sent: Monday, April 17, 2023 4:55 PM
To: [email protected]
Subject: Re: [w0yc-p25] P25 Capable users?
?
Me too; I am P25 capable, Dave.
Perhaps a spreadsheet with the P25 radio ID's might be helpful? Not sure.
?
--
-----
Matthew Genelin
Computer Engineer
mgenelin@...
+1 (612) 605-5382
?
ARS N0YNT/W0USD/W0YC
GMRS WQCQ790
?
NNNNN
?
?
On Sun, Apr 16, 2023 at 5:14 AM, Eric Osterberg <ejosterberg@...> wrote:
I have 5 UHF P25 radios, + 1 all band(VHF/UHF/700/800/900) and 3, 700/800
All but one are in AZ at the moment.
Basically all XTS5000, except for 1 Harris radio.
?
On Sat, Apr 15, 2023 at 10:52?PM David Ventura <dfujikiv@...> wrote:
Hello, I was wondering how many P25 capable users we have so we can communicate using this digital voice mode.
I bought an XTS 3000 Model II Motorola Astro HT on eBay, I will not get it for a few days, but it will be programmed before I return to MN early May.
Dave, KE0NA
?
|
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
Morning Kyle & Everyone: Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Don Burgess KC0QNA Cell Phone:? 507-241-0270 E-mail:? thelostiowan@...
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum <kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
Hello all,
I have successfully?read my XTS 3000 Model II HT (bought an old Dell Laptop running XP). It appears that the radio is configured for trunking and I do not have the knowledge on how to turn off what needs to be turned off to make it usable for Amaterur radio. I cannot even save the code plug since it has "invalid fields". I think the quickest way to fix this would be to load a code plug from another XTS 3000 that has been set up for amateur radio. Does anyone have a code plug that I can use to overwrite the trunking configuration in my radio so I can start setting it up properly?
Thank you, Dave Ventura, KE0NA
On Tue, May 2, 2023 at 7:13?AM Don Burgess via <Thelostiowan= [email protected]> wrote: Morning Kyle & Everyone: Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Don Burgess KC0QNA Cell Phone:? 507-241-0270
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum < kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
Hello Dave,
?
Are you able to read the codeplug from the radio then email it to me?
?
I can try to redo it for you.
?
Thanks,
?
Mike Norrbom (N0VZC)
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
David Ventura
Sent: Wednesday, May 3, 2023 4:20 PM
To: [email protected]
Subject: Re: [w0yc-p25] Astro 25 radios on eBay
?
I have successfully?read my XTS 3000 Model II HT (bought an old Dell Laptop running XP).
It appears that the radio is configured for trunking and I do not have the knowledge on how to turn off what needs to be turned off to make it usable for Amaterur radio. I cannot
even save the code plug since it has "invalid fields".
I think the quickest way to fix this would be to load a code plug from another
XTS 3000 that has been set up for amateur radio.
Does anyone have a code plug that I can use to overwrite the trunking configuration in my radio so I can start setting it up properly?
?
On Tue, May 2, 2023 at 7:13?AM Don Burgess via <Thelostiowan=[email protected]> wrote:
Morning Kyle & Everyone:
Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Cell Phone:? 507-241-0270
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum <kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but
the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
Thanks Mike,
I got the invalid fields cleaned up (so I could write it out), and was able to configure one analog and two Astro channels, I think scan?lists are set up, but the three position toggle and other items are still a mystery to me. I put my DMR ID in the Personal ID field (a unique number that should work for P25, correct?). Also, why is it writing?out a session log? I turned off security, which got rid of the Key Lock error. Trunking is still there, but I am afraid to mess with it.
Thanks again, Dave, KE0NA
On Thu, May 4, 2023 at 3:28?AM Mike Norrbom < mnorrbom@...> wrote:
Hello Dave,
?
Are you able to read the codeplug from the radio then email it to me?
?
I can try to redo it for you.
?
Thanks,
?
Mike Norrbom (N0VZC)
?
?
I have successfully?read my XTS 3000 Model II HT (bought an old Dell Laptop running XP).
It appears that the radio is configured for trunking and I do not have the knowledge on how to turn off what needs to be turned off to make it usable for Amaterur radio. I cannot
even save the code plug since it has "invalid fields".
I think the quickest way to fix this would be to load a code plug from another
XTS 3000 that has been set up for amateur radio.
Does anyone have a code plug that I can use to overwrite the trunking configuration in my radio so I can start setting it up properly?
?
On Tue, May 2, 2023 at 7:13?AM Don Burgess via <Thelostiowan=[email protected]> wrote:
Morning Kyle & Everyone:
Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Cell Phone:? 507-241-0270
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum <kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but
the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
I'd be interested in a pointer to where I might find CPS for the XTS3000.
Here's what I'm using for my XTS5000 radios
Also, if anyone is looking for batteries, let me know. I might have a couple I can spare. 73
On Thu, May 4, 2023 at 2:05?PM David Ventura < dfujikiv@...> wrote: Thanks Mike,
I got the invalid fields cleaned up (so I could write it out), and was able to configure one analog and two Astro channels, I think scan?lists are set up, but the three position toggle and other items are still a mystery to me. I put my DMR ID in the Personal ID field (a unique number that should work for P25, correct?). Also, why is it writing?out a session log? I turned off security, which got rid of the Key Lock error. Trunking is still there, but I am afraid to mess with it.
Thanks again, Dave, KE0NA
On Thu, May 4, 2023 at 3:28?AM Mike Norrbom < mnorrbom@...> wrote:
Hello Dave,
?
Are you able to read the codeplug from the radio then email it to me?
?
I can try to redo it for you.
?
Thanks,
?
Mike Norrbom (N0VZC)
?
?
I have successfully?read my XTS 3000 Model II HT (bought an old Dell Laptop running XP).
It appears that the radio is configured for trunking and I do not have the knowledge on how to turn off what needs to be turned off to make it usable for Amaterur radio. I cannot
even save the code plug since it has "invalid fields".
I think the quickest way to fix this would be to load a code plug from another
XTS 3000 that has been set up for amateur radio.
Does anyone have a code plug that I can use to overwrite the trunking configuration in my radio so I can start setting it up properly?
?
On Tue, May 2, 2023 at 7:13?AM Don Burgess via <Thelostiowan=[email protected]> wrote:
Morning Kyle & Everyone:
Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Cell Phone:? 507-241-0270
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum <kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but
the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
Re: Astro 25 radios on eBay
LInk to XTX3000 Astro CPS:
I'd be interested in a pointer to where I might find CPS for the XTS3000.
Here's what I'm using for my XTS5000 radios
Also, if anyone is looking for batteries, let me know. I might have a couple I can spare. 73
On Thu, May 4, 2023 at 2:05?PM David Ventura < dfujikiv@...> wrote: Thanks Mike,
I got the invalid fields cleaned up (so I could write it out), and was able to configure one analog and two Astro channels, I think scan?lists are set up, but the three position toggle and other items are still a mystery to me. I put my DMR ID in the Personal ID field (a unique number that should work for P25, correct?). Also, why is it writing?out a session log? I turned off security, which got rid of the Key Lock error. Trunking is still there, but I am afraid to mess with it.
Thanks again, Dave, KE0NA
On Thu, May 4, 2023 at 3:28?AM Mike Norrbom < mnorrbom@...> wrote:
Hello Dave,
?
Are you able to read the codeplug from the radio then email it to me?
?
I can try to redo it for you.
?
Thanks,
?
Mike Norrbom (N0VZC)
?
?
I have successfully?read my XTS 3000 Model II HT (bought an old Dell Laptop running XP).
It appears that the radio is configured for trunking and I do not have the knowledge on how to turn off what needs to be turned off to make it usable for Amaterur radio. I cannot
even save the code plug since it has "invalid fields".
I think the quickest way to fix this would be to load a code plug from another
XTS 3000 that has been set up for amateur radio.
Does anyone have a code plug that I can use to overwrite the trunking configuration in my radio so I can start setting it up properly?
?
On Tue, May 2, 2023 at 7:13?AM Don Burgess via <Thelostiowan=[email protected]> wrote:
Morning Kyle & Everyone:
Just a quick opinion from us gang here in South Central Minnesota. The best Hand Hand Helds are the ones that have FPP programability in it....or other words -- Program THE repeaters you want on the fly includiung DCS/PL or even NAC numbers.
This saves you from being tied to a programming cable and a PC in my opinion.
If you have a question, let me know.
Cell Phone:? 507-241-0270
On Tuesday, May 2, 2023 at 08:06:19 AM CDT, Kyle Korum <kylekorum@...> wrote:
Here's a pretty good deal for $294 shipped. A Q-split XTS5000R (ruggedized) with battery, IMPRES charger, and speaker mic. It's an Aussie tagged radio, but
the P/N is the same as NA units, so there shouldn't be any issues with codeplug programming. They look to be in really decent shape!
|
UHF Repeaters In The Metro
????Hello All:
I am going to the Saint's Game tonight -- and was wondering if anyone could shoot me the UHF P-25 channels and their NAC Codes -- So I could try and reach them while I am there???
I know Bayport is:
442.975+ DCS 612? NAC 293
What is US BANK and Riverside??
Thank you,
Don
Don Burgess KC0QNA Cell Phone:? 507-241-.0270 E-mail:? thelostiowan@...
|
Re: UHF Repeaters In The Metro
444.650 N0BVE Repeater Information
Output: 444.6500
Input: 449.6500
PL Tone: 114.8 Hz
NAC: $293
442.425 W0YC/R NAC 700 and FM 114.8/114.8
St. Paul, near the MN State Fair
|
Re: UHF Repeaters In The Metro
Thank you sir,
I so appreciate the quick turn around here...
Don
Don Burgess KC0QNA Cell Phone:? 507-241-.0270 E-mail:? thelostiowan@...
On Wednesday, May 10, 2023 at 10:06:02 AM CDT, Dan Gelle KC0CAP <kc0cap@...> wrote:
444.650 N0BVE Repeater Information
Output: 444.6500
Input: 449.6500
PL Tone: 114.8 Hz
NAC: $293
442.425 W0YC/R NAC 700 and FM 114.8/114.8 St. Paul, near the MN State Fair
|
Re: UHF Repeaters In The Metro
Don,
Here is the repeaterbook listing with all the P25 systems to date in Minnesota:
-- ----- Matthew Genelin Computer Engineer mgenelin@... +1 (612) 605-5382
ARS N0YNT/W0USD/W0YC GMRS WQCQ790
NNNNN
|
Re: UHF Repeaters In The Metro
toggle quoted message
Show quoted text
On Wed, May 10, 2023 at 4:05 PM, MattyG <mgenelin@...> wrote: Don,
Here is the repeaterbook listing with all the P25 systems to date in Minnesota:
-- ----- Matthew Genelin Computer Engineer mgenelin@... +1 (612) 605-5382
ARS N0YNT/W0USD/W0YC GMRS WQCQ790
NNNNN
|
Re: Astro 25 radios on eBay
Does anyone have an Astro 25 codeplug for UHF in the Twin Cities they'd be willing to share? I have an XTS5000 I'd like to program, but I'm completely new to P25 still have much to learn about this CPS. Thanks in advance!?
|
Re: Astro 25 radios on eBay
I'd also be interested in that codeplug. I would like to merge with my AZ codeplug and having all the data in one place would be nice.
On Wed, May 24, 2023 at 9:02?PM Kyle Korum < kylekorum@...> wrote: Does anyone have an Astro 25 codeplug for UHF in the Twin Cities they'd be willing to share? I have an XTS5000 I'd like to program, but I'm completely new to P25 still have much to learn about this CPS. Thanks in advance!?
|
Re: Astro 25 radios on eBay
Hello Kyle,
I have an Astro code plug for my XTS 3000 with all the P25 metro repeaters and a few analog ones. It is a work in progress. Maybe we can learn together :-).? There's a breakfast gathering this coming Saturday in St. Anthony at Fat Nats Eggs for digital ham radio enthusiast, maybe we can meet there to discuss?
Dave, KE0NA?
Does anyone have an Astro 25 codeplug for UHF in the Twin Cities they'd be willing to share? I have an XTS5000 I'd like to program, but I'm completely new to P25 still have much to learn about this CPS. Thanks in advance!?
|
Motorola XTS2500I UHF Code Plug Metro Area & Minnesota
Hello Everyone:
Here is the UHF Metro Code Plug I made up for Don-BVE radio for a Motorola XTS2500I Model III HT.??
Please note? -- For us users down here in Sibley County and Mankato areas....we do a Analog P25 Channel then next channel as a Digital transmit...? This way if you find a DV P-25 mode in? use, you can listen in and NOT change modes or sequences.
Example R443.825-A? Channel 1 R443.825-D Channel 2
Please review and let me know if you have questions??? I will try and make breakfast on Saturday.
FYI -- Remember -- YOUR DMR ID##? is also your P-25 ID##....
CODEPLLUG ATTACHED
73's....
Don Burgess KC0QNA Cell Phone:? 507-241-.0270 E-mail:? thelostiowan@...
|
MattyG
Kyle Korum
Dan Gelle KC0CAP