|
Re: Need Your Dashboard Screen Shots!
I know this is primarily a Flex group, but here is my IC-7610 setup as it currently stands. On the left I have SDR Control for Icom, which is like the Mac version of SmartSDR for Flex. On the right is my Node-RED dashboard. The color scheme and overall look and feel is designed to match SDR Control for Icom to the best of my ability without resorting to custom graphics elements. On the top I have controls and displays for a Kasa Smart Wi-Fi Power Strip. I also have a soft power switch for the IC-7610 (it an be turned on and off via CI-V). Below that I have a propagation flow which gives me current solar water conditions and the MUF/foF2 for the Austin Ionosonde (which is currently down). Next is the Elecraft KAT500 tuner flow. In addition to the usual controls, I can press the Tune button to initiate a tune cycle and have my IC-7610 send a low power carrier. When the KAT500 indicates the the tune cycle is done, the flow automatically returns the IC-7610 to its previous normal settings. I can also manually control the L and C of the tuner with the Up/Dn arrows. Next is the QRZ lookup and MacLoggerDX interface for the SOTA station (the next flow down) that I have clicked on. I can enter the RST reports here and click the Time On/Time Off buttons to correspond to when the QSO began and ended. When I am done with the QSO, I click the Log QSO button and all the log info is saved to MacLoggerDX. Finally, I have my SOTA flow. Summits are color coded based on whether I have worked that summit before (Yellow) or whether I need that summit for a SOTA complete (Red). The points (the number after the summit) and the spot age are color coded in a heat map style. I can click on a station callsign to do a QRX lookup and prime the Log flow above it. I can also click on a summit to get more info about that summit. Clicking on an Age value will give me more info about that activation in a pop-up window. Behind the scenes I have a limited CI-V flow for talking directly to the IC-7610 (not using rigcntl or any third party software, Node-RED only). It only implements the commands that I use.
73, Scott AK5SD |
|
Field Day (Contesting) Dashboard Install Video
I was on Ham Radio 2.0 talking about my contest dashboard.? You could use it for Field Day, but I was going to make a Field Day specific screen, but just ran out of time.
So...the goal is to make a Winter Field Day/ARRL Field Day dashboard before Fall. If you want step by step instructions on how to load my Contesting Dashboard, check out this video. Kyle AA0Z |
|
Re: Need Your Dashboard Screen Shots!
开云体育Here is one I have not worked on in several months.
The X5105 was moved to field use. The layout was for cell phone.
The Xiegu X-5105 flow based on VE2CUZ's G90 flow. Includes features found on the X-5105, RF Gain, Noise reduction, QSK, etc. A work in progress.
On 6/20/2022 5:57 PM, Kyle K wrote: All, I'm working on a a new presentation and need some really cool screenshots of your dashboards to show of the cool stuff you can do in Node Red. |
|
Re: StreamDeck/Node-Red Integration Question
开云体育Hi Garth, ? I’ve done quite a bit with Stream Deck integration. If you like, we can set up a session for me to help you. Contact me direct if you like. ? My call at ARRL dot org ? 73 Dave wo2x ? ? From: [email protected] <[email protected]> On Behalf Of Garth Giselman
Sent: Monday, June 20, 2022 9:00 PM To: [email protected] Subject: [nodered-hamradio] StreamDeck/Node-Red Integration Question ? I am looking for advice on some trouble I am having getting the data I want on the StreamDeck.? I am using Alan WA9WUD's Palstar HF-Auto and LA-1K flows in Node Red and would like to output some of that data(i.e SWR, PWR, etc) to buttons on the StreamDeck.? I have tried playing with both the Websocket and REST examples in the files section, but just cannot seem to figure out how to just send data to a button without an action.? Any assistance would be greatly appreciated.?? |
|
Power Master II
开云体育Hi All, ? Speaking of Power Master II (as seen in my dashboard screenshot). I ordered it back in February but they were backordered. Just received it last week but had picked up an LP700 in the meantime. I decided to open it up and write a Node Red flow for it, then sell it. Anyone looking for a Power Master II watt meter with two 3 KW couplers new let me know. I’ll sell it for $740 + shipping. That is $50 off. Again, just received it last week after 4 month wait. ? 73 Dave wo2x ? |
|
Re: Need Your Dashboard Screen Shots!
开云体育Here's my dash. The Power Master II isn't plugged in right now so that's why the meters aren't displaying correctly. About to go through another station reconfiguration so things will be removed, moved, and added. ? The K4D button colors need some TLC. ? 73 Dave wo2x ? ? ? ? -----Original Message----- ? Here is my dashboard ? 73, and thanks, Dave (NK7Z) ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources ? On 6/20/22 16:07, Santiago Mejia via groups.io wrote: ? ? ? ? |
|
Re: Need Your Dashboard Screen Shots!
开云体育Thank You, ? All the ones posted look great. ? ? Sorry I hit send before adding my call. ? 73, George / W7GES? On Jun 20, 2022, at 5:00 PM, David De Coons wo2x <RocketNJ@...> wrote:
|
|
Re: Need Your Dashboard Screen Shots!
开云体育Wow George! Very nice! ? Dave wo2x ? ? From: [email protected] <[email protected]> On Behalf Of George Skoubis
Sent: Monday, June 20, 2022 7:22 PM To: [email protected] Subject: Re: [nodered-hamradio] Need Your Dashboard Screen Shots! ? Kyle, |
Scott Dupuie
Kyle AA0Z
Patrick Lenn
Edward Dowdy KA9EES
Mike Pate - K5MAP
Dave wo2x
Santiago Mejia
