开云体育

transmit set vox_enable=1 transmit set vox_enable=0

Hi, Using the Flexradio-request node, I tried sending a payload with "transmit set vox=1", or vox=on, but nothing happens, also no error is returned in debug. Looking for the right direction....

If you want even more performance, get one of the cases that support an nVME in PCIe 3 mode. That is my production Pi. Development Pi is a Pi500. 73 Dave wo2x Sent from my waxed string and tin cans.

Thought I'd give some input on this. I just upgraded my Pi4 16GB to a Pi5 16GB. This is a dedicated Pi running only NR off of a 64GB card. I have 24 separate flows going on in my dashboard so I'd say

Hi Barry, I got also some emails. The JSON file you will find here: /g/nodered-hamradio/files/%211%21%20Flows%20by%20Type/ROTORS/4O3A_Azimuth_Magnetic_Sensor.json We use it for remote

Tom: I happen to have the 4O3A Azimuth Magnetic Sensor but have yet to set it up. It is currently mounted on my KT-36 Triband yagi but have yet to place it in service. Your posting has rekindled my

Hi everyone, I'm new here, and I'd like to share a project I've been working on over the last four weeks. For years, our club station has experienced issues with our Create rotors. To address this, we

Hello Fabian, is there any swagger? or another description? I need to know what is available. Regards, Ondra ?t 17. 4. 2025 v 8:38 odesílatel Fabian/EB1TR via groups.io <fabian@...>

Hello Ondra. What do you need to know? ________________________________ Fabián Malnero Maccari, EB1TR https://www.eb1tr.com

Hello Eugeni, is there some description of URE cluster API ? Regards, Ondra OK1CDJ

Hi Patrick I was checking the Hawaii station today. Seems I have an intermittent “bug” with the SteppIR flow I wrote. I am going to load yours and modify for the 6400. I’ll let you know what I

Thanks. I wrote a new flow which works, but will check yours. I can send mine along as well. I added Normal, 180, Bi-directional buttons. Also Home and Calibrate. Then added a Manual/Tracking. It

Here you go. The bottom portion is about 80% perfected. It's just an option to control which Flex Slice is sending TX frequency to the SteppIR. It works fairly well, but get will run into an empty

Thanks Patrick I have a flow mostly working and allows tracking the Flex TX freq. please send yours and I’ll check it out. 73 Dave wo2x Sent from my waxed string and tin cans.

I've got one for you. I'm at work at the moment, but I'll post one this evening.

Dear OMs I am one of the early prototypes who went into REMOTE op.first via various Skype/VNC and evolved into Flex6300 and ex.military FLP PA with 10 electromechanical memories , various 6:2 and RX

Hi all I had modified a SteppIR flow 2 1/2 yrs ago for a MonstIR at the remote station in Hawaii. It worked great! Stupid me never made a good backup after the work I did. Anyone have a copy I sent

Hi All, Has the Pi5 GPIO issue been resolved? I checked the RPi forum and most of the topics are dated with February 2025 indicating the issue may be ongoing. I'm finding GPIO inputs to be very

Hello, can anyone share an example of how to switch antennas in the Flexradio ? Regards, Ondra -- 73 Ondra OK1CDJ https://x.com/ok1cdj http://blog.ok1cdj.com

To add to Alan’s post: The command will choose a relay group in the OM module. When you create the first group, it is number 1. You must remember the order that you created the groups so you know