Hi Patrick
I was checking the Hawaii station today.
Seems I have an intermittent ¡°bug¡± with the SteppIR flow I wrote. I am going to load yours and modify for the 6400.?
I¡¯ll let you know what I find.?
I do have the documentation on the SDA2000 API commands which are same as the SDA100 so shouldn¡¯t be hard to figure out.?
73 & thanks again.?
Dave wo2x
Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Apr 12, 2025, at 4:11?PM, Dave <rocketnj@...> wrote:
?
Thanks. I wrote a new flow which works, but will check yours. I can send mine along as well.?
I added Normal, 180, Bi-directional buttons. Also Home and Calibrate. Then added a Manual/Tracking. It stores flow variables for switching. ?I used UI Template nodes for buttons as I like the CSS on them.?
I also have built an Alpha 9500 flow based on some old work by Stu K6TU
I went on last night and was s9 +10 into NC from HI. Guess it works.?
Thanks
Dave
Sent from my waxed string and tin cans.?
On Apr 12, 2025, at 3:55?PM, Patrick Lenn via groups.io <nwmtech@...> wrote:
?
Here you go. The bottom portion is about 80% perfected. It's just an option to control which Flex Slice is sending TX frequency to the SteppIR. It works fairly well, but get will run into an empty message issue if switching back and forth between slices without a slight slice frequency change. I'm just not experienced enough to figure it out yet, but it's not a big deal.?
?
I've also got it setup with a personal Freq Sync option. Basically puts the SteppIR into AUTOTRACK, but stops the frequency message flow to the controller. I then use the SYNC button to send the message to the controller and have it follow. I also have a StreamDeck button that commands the sync as well. Works really well if you're operating with a SteppIR and multiple slices on a Flex. Then it's not constantly tuning when you move your TX slice. Mess around with it and it will make more sense.?
<SteppIR_flow_W7IB.json>
Dave wo2x