ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
Evening Gents, The IC7300 has a whole host of rig settings that work in one scenario and not in another. The setup for N1MM isn't happy with the Fldigi one for example. I'm not entirely convinced the rig setup is not 99% of the issue here. I wasn't getting any output on the serial in node until I changed something on the rig. Also when I changed the parse C-IV node RADIO_ADDR to 0x94to match the 94h in the 7300 it gives an error. Oddly enough I have a similar error on another unrelated flow.More investigation required there I think. Anyway. Here's a couple of screen shots. First is the debug from CI-V Get Freq, Second shows the whole flow and output from Serial In. There is no output from the final debug which leads me to think that the outgoing serial message is ok but Icom magic is killing something  
|
|
| |
And the engineering team is working on a new Tuner Genius firmware which is in final testing stage.?
Dave wo2x
Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 5, 2023, at 11:58 AM, AH0U <bruce@...> wrote:
?Where did you get the XL upgrade as the 4O3A site still shows 3.6.24 as the current version
tnx AH0U
Where did you get the XL upgrade as the 4O3A site still shows 3.6.24 as the current version
tnx AH0U
|
Hello to all,?
i'm looking for a nodered flow for the ACOM1200s.
Has anyone already played with that amplifire and nodered?
73 Louis?
DK4EE?
|
Re: Raspberry api availability
On Wed, Jan 4, 2023 at 11:22 AM, Dave wo2x wrote:
Next thing I need is a small fabless low power consumption Windows based PC. I want something we can run 24x7 running Windows as a “maintenance” PC on site. Electricity is costly there so we want to turn off equipment when not in use.?
You might take a look at?the Zimaboard?? ? They come with a Debian based Linux distro ()? installed with Docker.? ?I've only been playing with it running Node-Red in a Docker container.? However, you can hang an external SSD on it, blow out the OS, and put Windoze on it.? It runs on 12V too, without fans. Warren, KD4Z
|
Alex,
Can you post a screen shot of the Debug outputs showing the msg.payload going into and out of the Function node throwing the errors, and what is actually in that Function node?? You attached my sample with only one Function node.? If that is the function that is throwing errors, I would think it is due to the payload length is different than what my sample code was written for. (IC-706 / IC-725)?
Warren, KD4Z?
|
Thanks Dave,
? I’m in no hurry. ?I just upgraded the firmware to see if I saw the same result. ?
? I will probably not be in the shack anyway as my mother in law brought dinner and we will probably visit for a while!
73,
George / W7GES?
toggle quoted message
Show quoted text
On Jan 4, 2023, at 5:56 PM, Dave wo2x <RocketNJ@...> wrote:
? George, I am going to help Joe tomorrow via TeamViewer. I’ll have an idea of what is going on then.?
I’ve been running the alpha builds on my PG XL here and I may have had to change something along the way. It hopefully will be a simple “fix”.?
Here is my screen with amp running 3.7.28.?
73 Dave wo2x
<image0.jpeg> Sent from my waxed string and tin cans.? On Jan 4, 2023, at 7:50 PM, George / W7GES <geo.skoubis@...> wrote:
? I’m also seeing wonky values in SWR in standby and also values that don’t match the front panel SWR on transmit.?
I just upgraded now after reading this post and did restart the server.?
I am using an old version of the PGXL flow but it has worked well for months. ?
Will look at debug messages after dinner if I can get back to the shack.?
73,
George / W7GES? On Jan 4, 2023, at 2:48 PM, Dave wo2x <RocketNJ@...> wrote:
? Nothing has changed in the amp API. Try restarting Node Red server and also double check IP of amp matches TCP node in amp flow.?
If you still have problems I can help via TeamViewer.?
Dave wo2x Sent from my waxed string and tin cans.? On Jan 4, 2023, at 4:45 PM, Joe W. <jwussler@...> wrote:
?Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating? Everything else looks ok, Joe WA?O <dummyfile.0.part>
|
George, I am going to help Joe tomorrow via TeamViewer. I’ll have an idea of what is going on then.?
I’ve been running the alpha builds on my PG XL here and I may have had to change something along the way. It hopefully will be a simple “fix”.?
Here is my screen with amp running 3.7.28.?
73 Dave wo2x
 Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 4, 2023, at 7:50 PM, George / W7GES <geo.skoubis@...> wrote:
? I’m also seeing wonky values in SWR in standby and also values that don’t match the front panel SWR on transmit.?
I just upgraded now after reading this post and did restart the server.?
I am using an old version of the PGXL flow but it has worked well for months. ?
Will look at debug messages after dinner if I can get back to the shack.?
73,
George / W7GES? On Jan 4, 2023, at 2:48 PM, Dave wo2x <RocketNJ@...> wrote:
? Nothing has changed in the amp API. Try restarting Node Red server and also double check IP of amp matches TCP node in amp flow.?
If you still have problems I can help via TeamViewer.?
Dave wo2x Sent from my waxed string and tin cans.? On Jan 4, 2023, at 4:45 PM, Joe W. <jwussler@...> wrote:
?Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating? Everything else looks ok, Joe WA?O <dummyfile.0.part>
|
I’m also seeing wonky values in SWR in standby and also values that don’t match the front panel SWR on transmit.?
I just upgraded now after reading this post and did restart the server.?
I am using an old version of the PGXL flow but it has worked well for months. ?
Will look at debug messages after dinner if I can get back to the shack.?
73,
George / W7GES?
toggle quoted message
Show quoted text
On Jan 4, 2023, at 2:48 PM, Dave wo2x <RocketNJ@...> wrote:
? Nothing has changed in the amp API. Try restarting Node Red server and also double check IP of amp matches TCP node in amp flow.?
If you still have problems I can help via TeamViewer.?
Dave wo2x Sent from my waxed string and tin cans.? On Jan 4, 2023, at 4:45 PM, Joe W. <jwussler@...> wrote:
?Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating? Everything else looks ok, Joe WA?O <dummyfile.0.part>
|
Re: File /K0VM Flows/LP-100A flows.json uploaded
#file-notice
I attempted to install this flow today but I'm having a similar problem to Ed's in that the serial connection is there, but I have no data coming across.
I'm using a Prolific serial to USB adapter, and I believe I have the port configured correctly.? My LP-100A is running v1.3.3.9, so the serial port is set to 115200, 8, N, 1. And my update to the serial port string in the flow uses the ID (/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0: 115200-8N1).
I can see in Debug that the toLP100 node is polling every 100 ms, but there's no activity in the Debug window when I'm looking at the Msg 1: Valid node.
Anyone have any suggestions as to what else can I look at to fix this?
Thanks,
Frank N6OI
|
Nothing has changed in the amp API. Try restarting Node Red server and also double check IP of amp matches TCP node in amp flow.?
If you still have problems I can help via TeamViewer.?
Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 4, 2023, at 4:45 PM, Joe W. <jwussler@...> wrote:
?Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating? Everything else looks ok, Joe WA?O <dummyfile.0.part>
|
Good afternoon all, After the 3.7.28 Firmware update my Node Red pages shows infinite SWR at idle and improper redaings when operating? Everything else looks ok, Joe WA?O 
|
Re: Raspberry api availability
N6RDF has a pretty extensive page describing the RPi alternatives at?
On Wed, Jan 4, 2023 at 2:22 PM Dave wo2x < RocketNJ@...> wrote: BTW, my Pi 400 shipped today from DigiKey’s MI warehouse. I should have it in a couple of days.?
They still had seven in stock after my purchase.?
They are quoting over 52 week lead time on a Pi 4B 4 GB.?
Crazy world!
Next thing I need is a small fabless low power consumption Windows based PC. I want something we can run 24x7 running Windows as a “maintenance” PC on site. Electricity is costly there so we want to turn off equipment when not in use.?
73 Dave wo2x Sent from my waxed string and tin cans.? ?This is another option, but not a Raspberry Pi 4, which probably has better benchmarks, but will do in a pinch.? I think these are in stock.?
Kyle
|
Re: Raspberry api availability
BTW, my Pi 400 shipped today from DigiKey’s MI warehouse. I should have it in a couple of days.?
They still had seven in stock after my purchase.?
They are quoting over 52 week lead time on a Pi 4B 4 GB.?
Crazy world!
Next thing I need is a small fabless low power consumption Windows based PC. I want something we can run 24x7 running Windows as a “maintenance” PC on site. Electricity is costly there so we want to turn off equipment when not in use.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jan 4, 2023, at 1:52 PM, Kyle K <kylekrieg@...> wrote:
?This is another option, but not a Raspberry Pi 4, which probably has better benchmarks, but will do in a pinch.? I think these are in stock.?
Kyle
|
Re: Raspberry api availability
This is another option, but not a Raspberry Pi 4, which probably has better benchmarks, but will do in a pinch.? I think these are in stock.?
Kyle
|
I don’t have Icom but guessing.?
Maybe the function nodes in question are receiving multiple, different payloads and error on the ones not expected. A debug node connected to node feeding function node in question can confirm. You may need to set debug node to complete message object instead of msg.payload
toggle quoted message
Show quoted text
On Jan 4, 2023, at 9:54 AM, Alex - G7KSE via groups.io <g7kse@...> wrote:
?ok, got the serial error sorted. Something to do with permissions in snaps on Ubuntu. Easiest thing was to use a spare RPi and set that up (I was going to do that at some point anyway). Connection made but errors crop up with function nodes now.
This is happening on a couple of nodes now so there must be some kind of issue that needs resolved there too.
Alex
|
ok, got the serial error sorted. Something to do with permissions in snaps on Ubuntu. Easiest thing was to use a spare RPi and set that up (I was going to do that at some point anyway). Connection made but errors crop up with function nodes now.
This is happening on a couple of nodes now so there must be some kind of issue that needs resolved there too.
Alex
|
Re: Raspberry api availability
I am not familiar with the Orange Pi. It states it runs Debian Linux.?
The Raspberry Pi 400 is the same as my current Pi 4B with 4 GB ram and that runs all my flows fine.?
The Pi 400 is supposed to have better cooling than the stock Pi 4B so they claim it runs faster.?
I have used the Pi 400 when I did the ARRL W1HQ club station. It worked fine there.?
73 Dave wo2x
On Wed, Jan 4, 2023 at 1:42 AM Bent Andersen < eskolin@...> wrote: Hi Dave
I have also a RPI-400 and it is running fine whit my node-red project.... But why they put a +300mhz faster CPU on the board and only 4Gb ram.... When you often need morer ram for running your projekt ?
Do you have any info about the Orange-Pi ? is this also a solution for a need of raspberry pi ???
73" oz1ct Ben? Send from my mobile office.
Just an FYI for those interested.
I ordered a Raspberry Pi 400 with 4 GB ram and 15 watt power supply from DigiKey today. This is same as a Pi 4a. With 4 GB ram. It comes in a keyboard case so if you want to run it with a monitor you only need to add a monitor and mouse. It has three USB ports and a micro HDMI port.? The charger is USB-C.
Price with charger is $78 and $6.99 flat rate Fed Ex shipping in U.S. plus tax.
I figure I would pass this on in case anyone is looking for one.
73
Dave wo2x
Sent from my waxed string and tin cans.
|
Re: Raspberry api availability
Hi Dave
I have also a RPI-400 and it is running fine whit my node-red project.... But why they put a +300mhz faster CPU on the board and only 4Gb ram.... When you often need morer ram for running your projekt ?
Do you have any info about the Orange-Pi ? is this also a solution for a need of raspberry pi ???
73" oz1ct Ben? Send from my mobile office.
Just an FYI for those interested.
I ordered a Raspberry Pi 400 with 4 GB ram and 15 watt power supply from DigiKey today. This is same as a Pi 4a. With 4 GB ram. It comes in a keyboard case so if you want to run it with a monitor you only need to add a monitor and mouse. It has three USB ports and a micro HDMI port.? The charger is USB-C.
Price with charger is $78 and $6.99 flat rate Fed Ex shipping in U.S. plus tax.
I figure I would pass this on in case anyone is looking for one.
73
Dave wo2x
Sent from my waxed string and tin cans.
|
Raspberry api availability
Just an FYI for those interested.
I ordered a Raspberry Pi 400 with 4 GB ram and 15 watt power supply from DigiKey today. This is same as a Pi 4a. With 4 GB ram. It comes in a keyboard case so if you want to run it with a monitor you only need to add a monitor and mouse. It has three USB ports and a micro HDMI port. The charger is USB-C.
Price with charger is $78 and $6.99 flat rate Fed Ex shipping in U.S. plus tax.
I figure I would pass this on in case anyone is looking for one.
73
Dave wo2x
Sent from my waxed string and tin cans.
|
Dave wo2x
Frank N6OI
Kyle AA0Z
Bent Andersen