¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: IC7300 rig control


Alex - G7KSE
 

Evening Gents,

The IC7300 has a whole host of rig settings that work in one scenario and not in another. The setup for N1MM isn't happy with the Fldigi one for example. I'm not entirely convinced the rig setup is not 99% of the issue here. I wasn't getting any output on the serial in node until I changed something on the rig. Also when I changed the parse C-IV node RADIO_ADDR to 0x94to match the 94h in the 7300 it gives an error. Oddly enough I have a similar error on another unrelated flow.More investigation required there I think.

Anyway. Here's a couple of screen shots. First is the debug from CI-V Get Freq, Second shows the whole flow and output from Serial In. There is no output from the final debug which leads me to think that the outgoing serial message is ok but Icom magic is killing something



Join [email protected] to automatically receive all group messages.