no... the context variables are what has been polled and stored... it's not a configuration parameter.

I'm in a meeting but afterwards I will go and change my HRD configuration to use the "test" TS-2000 radio.

I don't believe that the type of radio that is connected matters, but I have no way of testing (other than testing the sample ts-2000.)

Greg

Adrian

Here is a link for a description of Context Variables.

Alan. WA9WUD

https://nodered.org/docs/user-guide/context

Also, can you take a look at the context flow variable tab.? ? Yours and mine should look like this:

?

Hi Adrian,

?

I am connecting to the HRD IP Server, and note that the checkbox "Same PC connections only" is unchecked.? ?This allows the Linux server with NodeRed to connect to the other PC running HRD.

?

Greg VE9GFI

whoops .... "this site" means ....?https://mosquitto.org/download/

Hi Adrian,

Please install MQTT.? ? I am using Eclipse Mosquitto MQTT in a docker container, but this site has the installation instructions for a bare metal install too.

I'll look through my backups to see if I have a pre-mqtt HRD flow that I can also share.? ?That said, if you install MQTT, it will make future projects easier.? ? This HRD flow is part of an amplifier project and none of the systems are running on the same server.? ? ?MQTT and NodeRed are in docker on a linux server.? ?The amplifier has ESP32 MCUs that read voltages and publish to MQTT, and my desktop runs HRD.? ? ?

When it's properly installed, all the MQTT symbols will display as "connected".? ?

Greg VE9GFI

?

I've configured my Lotw and clicked the "test" button and it gets stuck on "testing" and never completes. The program continues to run and otherwise work. It won't download from lotw. Username and password work fine on the lotw site. Any ideas?

开云体育

Hi Adrian

The following files and folders have been updated in the Files area of the [email protected] group.

• /!1! Flows by Type/RADIOS/HRD_ve9gfi.json

By: ve9gfi@...

Description:
Ham Radio Deluxe integration. v.1.0 Requires: MQTT Description: Polls HRD and extracts the radio's frequency. Tracks the HRD Context and self-recovers if HRD is restarted. You can set the frequency via a dashboard menu. Developed using DM780 and a FT-847, as a part of larger Amplifier project. If you have additional commands that could be added, please DM me.

Anyone have a flow for a 2D greyline map? I'm not talking about the plottable full page made, but a smaller greyline map more the size that people are using in their rotor flows.?

David,

Thank You !!!

Steve KG5VK

Hi, Kyle:

I restarted Node Red on each of the two RPis. No change in behavior.
--
Mark

K0LO

I've also noticed that if you play around with the dashboard nodes and they are not performing like you expect, you might want to restart Node Red.? I've posted many dashboard questions in the nodred.org forum about unexpected behavior and gotten replies that the dashboard is old and antiquated and they are putting very little effort into updating it.?

Good news is, they are working on a new dashboard back end that will hopefully provide more functionality on spacing and placing nodes/groups/tabs on the dashboard.

Kyle

开云体育

I made more custom additions to my SVG-based S-Meter Flow. ?Video attached.

- Click Upper Left >> Configure RX Level Text, dBm, S, or Both
- Click Upper Right >> Configure Peak Tick Mark For, Peak or for Average Reading over last five seconds
- Click S-Meter Gauge, Left >> Mute the Slice, Gauge Background Turns Yellow
- Click on the S-Meter Gauge >> Sets Slice Volume; Volume Level is shown in Red on Gauge Header

There are many possibilities with Stephen's Flex Nodes and building custom Dashboard components with the SVG node.



Alan. WA9WUD

David

Are the flows for this posted somewhere in the repository ?

I would love to implement everything you have there less the K4D assets

Cheers!
Steve
KG5VK