开云体育

yes that's correct.? I did sudo reboot not shutdown (but will have tried that by the time you read this :D )

Scott

OK, with USB cable plugged into the PC the Windows version works.

?

Next, to confirm, you did move the USB to the Pi? Did you reboot the Pi after plugging in the USB? Not just restart FRStack. From the terminal prompt

sudo shutdown -fr now

?

73

Dave wo2x

?

?

From: [email protected] <[email protected]> On Behalf Of Scott - W5NJK via groups.io
Sent: Monday, January 25, 2021 1:02 PM
To: [email protected]
Subject: Re: [nodered-hamradio] Help with Modified MKCM SPE Amp.json

?

Yes I did do the restarting (even reboot, although I know it's overkill).

I have the spe utility running on my windows machine, I'm not aware on a Linux version.

Ill look again for a firmware update, and may try and see if using the remote serial interface works any different.

Thanks for all your help!


Sent from ProtonMail mobile



-------- Original Message --------
On Jan 25, 2021, 11:46 AM, Alan Blind, WA9WUD < a.alan.blind@...> wrote:

?

Scott - Another thought.

?

Are you shutting down and restarting?FRStack after each change to the config file?

?

Shutdown Command. ? ??sudo systemctl stop FRStackWebApi

?

Start Command. ? ? ??sudo systemctl start FRStackWebApi

?

And then, make sure FRStack is running:

?

Status Command. ??systemctl status FRStackWebApi

?

?

Word of caution.? FRstack will fail to start if there are any syntax errors in the appsettings.json config file.? Good to check FRStack is running.

?

Alan?

-- 
--- Sent with ProtonMail Secure Email ---