Re: Help with Modified MKCM SPE Amp.json
|
OK, with USB cable plugged into the PC the Windows version works. ? Next, to confirm, you did move the USB to the Pi? Did you reboot the Pi after plugging in the USB? Not just restart FRStack. From the terminal prompt sudo shutdown -fr now ? 73 Dave wo2x ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Scott - W5NJK via groups.io Sent: Monday, January 25, 2021 1:02 PM To: [email protected]Subject: Re: [nodered-hamradio] Help with Modified MKCM SPE Amp.json ? Yes I did do the restarting (even reboot, although I know it's overkill).
I have the spe utility running on my windows machine, I'm not aware on a Linux version.
Ill look again for a firmware update, and may try and see if using the remote serial interface works any different.
Thanks for all your help!
Sent from ProtonMail mobile
-------- Original Message --------
On Jan 25, 2021, 11:46 AM, Alan Blind, WA9WUD < a.alan.blind@...> wrote: ? Are you shutting down and restarting?FRStack after each change to the config file? Shutdown Command. ? ??sudo systemctl stop FRStackWebApi Start Command. ? ? ??sudo systemctl start FRStackWebApi And then, make sure FRStack is running: Status Command. ??systemctl status FRStackWebApi Word of caution.? FRstack will fail to start if there are any syntax errors in the appsettings.json config file.? Good to check FRStack is running.
|
Dave wo2x