Hi Jos,
this sounds decidedly odd. I'll have a look at it. :-)
--
Rune / 5Q5R
toggle quoted message
Show quoted text
On Tue, 14 Jan 2020 at 18:48, Jos Stevens <jrs@...> wrote:
Hi Rune,
I still find some strange things in the marker handling :
1) I did a 2 port calibration from 10kHz to 1400MHz (and pressed "apply")
2) I filled all 9 marker-bars with different frequencies from 1MHz to
1400MHz
3) Then I did a sweep with CH0 connected to CH1 by a +/-30 cm long
RG316 cable, that was still connected to the VNA after the through
calibration.
4) After this, the markers 1 up to included 5 on the data field were
filled with data, the markers 6 up to included 9 were EMPTY. !
5) Marker 4 its color was grey so the tekst above the data field did not
show up on the gray background.
6) I tried to change the color, but marker 4 does not accept the new
color . (I tried several others and they did)
7) The markers 3 and 4 original frequencies that were set were
overwritten both with 100.616536MHz (I had set marker 5 , to 100MHz)
I hope this is of help for this great program.
Kind regards
Jos
Op 13-1-2020 om 17:30 schreef Rune Broberg:
Hi Leif,
they are in 0.2.2 - set up which marker data you want under "Display
settings".
