Hi David,
I will try sending you an experimental version at some point, and if it
works, I could include that code in the future releases. Whether it keeps
working is a different matter altogether.
--
Rune
On Mon, 7 Oct 2019 at 08:26, David J Taylor via Groups.Io <gm8arv=
[email protected]> wrote:
The only discrepancy - which is fatal to the software working - that I have
seen thus far, is that the developers have changed the prompt line, which I
use to detect when output from the device has finished. Being able to
detect either prompt might make it work, or there might be other
differences. I don't have a way to test this at this time.
edy555's firmware has recently received a number of updates the use of
which is limited to newer firmwares, but which are pretty much required to
have both fast and stable PC control of the NanoVNA. I'm looking at
implementing support for these in the next version, or the one after, of
NanoVNA-Saver.
I'm all in favour of trying to support the variety of devices and firmwares
that are appearing, but the software is primarily going to be tested
against the hardware I have - a NanoVNA-H running edy555's 0.2.2 firmware
at the moment.
Rune / 5Q5R
======================================
Rune,
I have both the nanoVNA and the nanoVNA-F, and I would be happy to test
any
updates you may bring.
On another PC I do have Python installed (2.7, but could update) so
perhaps
I could help with (some elements of) the source too? I don't know whether
that PC has the right drivers, though.
73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web:
Email: david-taylor@...
Twitter: @gm8arv
