If the antenna is supported by a metal mast, make sure the lower discone
elements (those closest to the mast) are connected to the coax OUTER
SHIELD, and the top elements to the coax INNER. If the connections are
reversed, the mast interferes with the antenna impedance.
Regards,
Joe L
On Tue, Aug 1, 2023 at 12:26 MarcoFI <marcofigroupsio@...> wrote:
Hi Team,
I try to measure VSWR of the following antenna:
NanoVNA is calibrated to antenna side of RG58. I had to use N-F/SMA-M +
SMA-F/SMA-F adapters in front of SOL kit, but tried to subtract it with
edelay.
On the product page someone wrote "Swr on 2m is 1.5 to 1.7.1 on 446 it's
1.0.1". I can't seem to get even close, something wrong with me setup. Any
suggestions what am I missing?
Best Regards,
MarcoFI
--
__Joe Leizerowicz
6424 34 Avenue NW, Calgary, AB T3B 1N1
403-604-7791