Having your device connect with DefuseDemo when it is in DFU mode is not the same as in normal running mode - there are 2 different drivers.
Before going any further - Verify when you connect your running device to the PC that it comes up as a comm port and connect to that comm port using the terminal program.
toggle quoted message
Show quoted text
On Thursday, December 2, 2021, 11:58:02 a.m. EST, A. via groups.io <ea7hj@...> wrote:
On Thu, Dec? 2, 2021 at 08:06 AM, DiSlord wrote:
When writing a bug report, it is good practice to provide as detailed a
description as possible.
Worked with everyone, which ones? What does it not work with? How does it
manifest? The device is not recognized in the system, or there is no
connection.
Thank you for answering DiSlord.
The programs that I try to use are Nanovna, Nanovna-APP, Nanovna-Saver and Nanovna-Sharp. All work with the original firmware v0.5.0 20200221 but the aforementioned programs are not connected with the last version DiSlord 20211121 that is the only one I have tried, at 101 points (either at 401 points). But Yes, it connects perfectly with the DfuSeDemo.
I do not report a problem, but a question in case someone knew the solution to my situation.
By the way, fantastic the latest firmware version. Thanks to Lot.
Regards
