Thanks, so the only thing I should do is to multiply the impedance/resistance/reactance values by 6 and they should be correct?
Also looks like the attached picture became very low resolution after uploading. Here are the full screenshots, with marker details:
Cal. 50 ohm:
Cal. 300 ohm:
The antenna should be tuned to around the center of the CCIR FM band, so the 95 MHz match is most likely correct.
I'm not sure what causes the other SWR dips, it's just a regular folded dipole with nothing attached to it. The NanoVNA is right next to it, connected by a piece of PCB with two holes and an SMA connector soldered onto it, like this:
Are these dips present just because it isn't an ideal simulation-like environment?
goscickiw