开云体育

The MT... modes were created well before the advent of the ARQ / AMP modes. The largest MT user base were (and possibly still) the Military Affiliate Radio System, MARS. The most effective modes for

[email protected]> wrote: I think that would be fine for the shoot and forget (Autosend) method, but my understanding is that if you're uring ARQ mode it will think the radio is "busy" and not go

Try it with the squelch off, you may end up with a bunch of junk on the screen, but should not effect the reception and validation of checksum data. Kind of think the high latency of MT-XXXX modems

[email protected]> wrote: I played around with different ones and it turns out that the squelch response for MT-63 1KS is pretty slow. It made the ARQ mode in Flmsg unusable. I was doing a demo for

which mode Richard ? <hobbes1069@...> wrote:

Glen yes just HRD seen is windows (bottles) there, and the others native linux. I also have FTBCAT and FTbasicMMO, YCAT etc under wine for Yaesu gear. The latest HRD runs fine with its supported

The Country (CTY) Files were updated on 06 May 2025: https://www.country-files.com/cty-3515-06-may-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over

firmware-11.11.0-i386-DVD-1.iso <https://cdimage.debian.org/cdimage/unofficial/non-free/images-including-firmware/archive/latest-oldstable/i386/iso-dvd/firmware-11.11.0-i386-DVD-1.iso> or

With the first link you sent after selecting 386, which one do I install? I installed a DVD which had everything but the wifi on it. [email protected]> wrote:

The other solution is to start again with a debian image that offers non-free fw incl etc, then update.

Running into a roadblock. This computer does not have an ethernet port, however it has on board wifi. I have searched for this driver but everything link i find says 404 error. Can anyone help with

Hi Adrian, I use Mint / Ubuntu – the latest revisions. I am curious, are you running the latest HRD, or the last ‘freeware’ version (which was well behaved on Wine)? I suspect the other Ham apps

I'm working on a laptop to laptop demo of Flmsg + Fldigi and I've got it mostly working using two USB sound cards in a crossover configuration. Signal noise floor is about -80db and when I "transmit"

thanks <vk4tux@...> wrote:

See https://www.youtube.com/watch?v=JW0f3NOjWys

I don't have a WoWe laptop. I have loaded KM4ACK Linux 73 on various Laptops. I've had hiccups in loading the script. I used a file explorer to go to the Linux 73 folder. I right-click on Linux 73. It

Yes <n9giRadio@...> wrote:

When trying to install debian it states: The missing firmware files are: b43-open/ucode15.fw b43/ucode15.fw Where do I find this to download? [email protected]> wrote:

I compile a lot on trixie also and useful for running differrent program versions and forks etc, Again Debian KDE Menu editor is ideal for this ; 73 vk4tux

Yes, haven’t got an answer on my last entry there. [email protected]> wrote: