开云体育

JPD Borgna wrote: yajeed2000 wrote: Has any one made a board with this and solder it right???? please! if not, i have to call my manufacturer right now to stop the making of my board! Saludos, Juan

I'm just using the file -> plot dialogue using the windows version of kicad.I will try to print it out using Linux over the weekend, to see if it makes any difference. check all of Constituyentes 6200

yajeed2000 wrote: Well, the pins are not perfect (all in the center of the pad) but all of them appear to be good. The poscript you send is a file->print or its a plot printed? Saludos, Juan Pablo. --

Hi, I forgot to mention that I'm using a 20x Binocular microscope to check the alignment of the pins,if that makes any difference. David.

yajeed2000 wrote: Hi, I've uploaded it to the test print plot folder. I've been using Ghostview to veiw and print the files to a HP laserjet colour printer (a new one at work, so its not worn out).

Hi, I've uploaded it to the test print plot folder. I've been using Ghostview to veiw and print the files to a HP laserjet colour printer (a new one at work, so its not worn out). Can people please

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the kicad-users group. File : /Print Plot Tests/PQFP208-SoldPCmp.ps Uploaded by :

yajeed2000 wrote: Could you post a copy of one that has this problem to the files section of the group? That way others can try rpinting it see if it is just a problem at your end or a general Kicad

Hi, I am trying to print out several square 28 x 28 208 pin quad flat packages using a standard laser printer. However when printed the pads do not line correctly with actual component pins.There is a

hi list, has someone a library with the MSP430x14x microcontroller? Or the module 64-Pin Quad Flat Pack (QFP)? thanks, bye fernando

Hi, 1st - Select the option 'Add wire or via' 2nd - Go to the place of the zone where you want to put de via. Left click. 3rd - Without moving the mouse, right click and select 'Add via' 4th - Without

Thanks to everyone who has asked my question. I had missed to click with the left button on the zone before clicking with the rigth button to add the via. Pedro.

hmistry494 wrote: AFAIK this is not possible at present. You can add values in additional fields of a component such as price or part number but I don not think it is possible yet to select these into

JPD Borgna wrote: you are right, I wasn't thinking. I actually did have the zone connected to ground. that is why it worked in the end. But, DRC does not recognize the connections unless an actual

ryan williams wrote: Pedro Martn del Valle wrote: I am trying to connect 2 GND-zones, one on the components layer and the other one on the copper layer, using vias. Can anyone tell me how to put this

hi... thanks Manuel, and sorry again fernando a la componentes y

Pedro Martn del Valle wrote: I'm not sure if there is a good way to do it. I just built a board that needed this. I ended up drawing actual traces between all of the grounds. When the board is

TRANSLATION: Tonamiben wrote: (Pafbat did translate) Hi Peter, when you put the via with 'Add wire or via' option, right click and select 'Select couple of layers for vias'. It offers you the

fluissman wrote: My english is not very good too, but it would be very interresting to see what you reply and what was the solution you propose. Benoit

Hola Pedro, cuando colocas la via con la opcion 'A?adir pista o via', le das a la tecla derecha del raton y una de las opciones es 'Seleccionar par de capas para las vias'. Precisamente te da a