yajeed2000 wrote:
Hi,
I've uploaded it to the test print plot folder.
I've been using Ghostview to veiw and print the files to a HP laserjet
colour printer (a new one at work, so its not worn out).
Can people please try this file and let me know if it has the same
problem.
Hi there!
Ive printed it with a lexmark laser printer using linux and ghostview
and put my spartan2-pq208 on top of the printed page and (with a
magnifiying glass) saw that the pads are OK!
Im interesed in this tests too because ive just send my board (wich
uses? this) to the factory for made some
prototypes. If any one else can test them, please!!
Saludos, Juan Pablo.
Thanks,
David.
--- In kicad-users@..., Ian bell wrote:
yajeed2000 wrote:
Hi,
I am trying to print out several square 28 x 28 208 pin quad flat
packages using a standard laser printer.
However when printed the pads do not line correctly with actual
component pins.There is a small error in the spacing of the pins
that
is caused either by the printer (paper stretch)or in Kicad.
It would be useful if some kind of VERY SMALL offset adjustment
(X and
Y direction)could be introduced in the print dialog.
Alternatively could anyone suggest a way of correcting this error.
Thanks.
David
Could you post a copy of one that has this problem to the files
section of the group? That way others can try rpinting it see if it
is
just a problem at your end or a general Kicad problem.
Ian
--
Ian T-Bell
aka RuffRecords
aka RedTommo
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
--------------------------------------------------------------------~->
Please contribute your symbols and modules to the library folder in the group files section.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> To unsubscribe from this group, send an email to:
kicad-users-unsubscribe@...
<*> Your use of Yahoo! Groups is subject to:
--
Juan Pablo Daniel Borgna -- Técnico Electrónico
INTI-Electrónica e Informática
Dirección: Avenida General Paz 5445 entre Albarellos y Constituyentes
CC157 (CP B1650KNA) San Martín, Bs. As., Argentina TE:+(5411)4724-6200
