HamQTH.com looks not working now. We can not access their home page either.
On 2025-03-18 »ð 8:02:41, Jim K2QB via groups.io <nfjimc@...> wrote: Anyone else having trouble with the QTH lookup not working?
?
K2QB
|
Anyone else having trouble with the QTH lookup not working?
?
K2QB
|
New case is coming along, did you get the images of the build and what screws are needed?
--
|
It's up to you. mode can be part of the requirements to show/not show the X in the ? column There are six options available to you. SeventyThree(s).
?
PS. If it took 9 hours to rebuild your logbook, you REALLY do need to get a new PC, or use a faster program.
On 03/16/2025 11:14 PM EDT rick darwicki via groups.io <n6pe@...> wrote:
?
?
I have noticed "worked" stations not showing up in "?" column and other station marked "X" that I haven't worked.?
I did a log recalculate (10am to 7pm) and there are still unexplainable errors in the "?" column.
Might this be an issue with the contact "mode" ??
|
I have noticed "worked" stations not showing up in "?" column and other station marked "X" that I haven't worked.?
I did a log recalculate (10am to 7pm) and there are still unexplainable errors in the "?" column.
Might this be an issue with the contact "mode" ??
|
... it's getting close to that time of the year again, only 14 days to go.
?
SeventyThree(s)AndBackToNetOverOver.
On 03/16/2025 8:14 PM EDT Jean-Jos¨¦ JULIEN via groups.io <fm8tf972@...> wrote:
?
?
Hi everybody,
I'm looking for help withmy baofeng uv-5rh. The screen became blank and I can't see nothing. The radio is still working. If someone could help me with the service manual of this transceiver.
|
Hi everybody,
I'm looking for help withmy baofeng uv-5rh. The screen became blank and I can't see nothing. The radio is still working. If someone could help me with the service manual of this transceiver.
|
It looks no reply from ic705. Check menu settings in ic705 again or show us all settings on CAT.
On 2025-03-16 ÈÕ 23:12:30, Panos via groups.io <sv1grn@...> wrote: Hi, Radio 2 is blue (working) with IC-705 but, doesn't read frequency. What I am doing wrong regarding attached photo?
|
Re: COMport: Band tracking data
Bob,
it must be some local magic or a charm smuggled in Your email! Whichever, it worked for me, too...
So, I am now ready for in-action tests, he he...
Big, big thanks...
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 16.03.2025 14:15:32
Temat Re: [hamlogger] COMport: Band tracking data
I opened the slave port with the radio on 6m.
I started JTDX on 20m FT8
I swtched JTDX to 15m FT8
?
I see this:
?
?
My radio has no CAT, so none of these messages to the slave port are as a result of sending/receiving CAT messages to/from the radio.
?
SeventyThree(s).
On 03/16/2025 8:40 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
?
Bob,
?
big thanks for the answers - appreciated very much.
?
1. Absolutely clear - thank You.
?
2.?I tested that (without the amp connected, however) and there was no command shown
in the Slave-port debug window when WSJt-X/JTDX took over the Radio-port.
?
Does that code forward the UDP generated frequency commands without showing them
in the Slave-port Debug window,
please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 16.03.2025 13:16:00
Temat Re: [hamlogger] COMport: Band tracking data
?
1) If there was a radio connected to the slave port, and the slave polling option was configured, the slave frequency and slave mode fields would be populated.
?
2) If there was something connected to the slave port, the data you see in the debug window would be sent. Yes, there is code (probably untested) that takes frequency changes from JTDX UDP messages and sends then to the slave port (easy enough to test).
?
Or something like that. SeventyThree(s.
?
?
On 03/16/2025 5:36 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.?
I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
?
The Slave port set-up is as follows:
?
It resulted in following the frequency changes of VFO A:
?
and it is how the radio port has been configured:
?
My questions:
?
1. Should?
 ?show the frequency?data?
2. Is there a way to forward frequency data to the slave port
? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed,
? ? please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
?
?
Big thanks, Bob!
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
?
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
?
?
?
?
|
Hi, Radio 2 is blue (working) with IC-705 but, doesn't read frequency. What I am doing wrong regarding attached photo?
|
Re: COMport: Band tracking data
I opened the slave port with the radio on 6m.
I started JTDX on 20m FT8
I swtched JTDX to 15m FT8
?
I see this:
?
?
My radio has no CAT, so none of these messages to the slave port are as a result of sending/receiving CAT messages to/from the radio.
?
SeventyThree(s).
On 03/16/2025 8:40 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
?
Bob,
?
big thanks for the answers - appreciated very much.
?
1. Absolutely clear - thank You.
?
2.?I tested that (without the amp connected, however) and there was no command shown
in the Slave-port debug window when WSJt-X/JTDX took over the Radio-port.
?
Does that code forward the UDP generated frequency commands without showing them
in the Slave-port Debug window,
please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 16.03.2025 13:16:00
Temat Re: [hamlogger] COMport: Band tracking data
?
1) If there was a radio connected to the slave port, and the slave polling option was configured, the slave frequency and slave mode fields would be populated.
?
2) If there was something connected to the slave port, the data you see in the debug window would be sent. Yes, there is code (probably untested) that takes frequency changes from JTDX UDP messages and sends then to the slave port (easy enough to test).
?
Or something like that. SeventyThree(s.
?
?
On 03/16/2025 5:36 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.?
I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
?
The Slave port set-up is as follows:
?
It resulted in following the frequency changes of VFO A:
?
and it is how the radio port has been configured:
?
My questions:
?
1. Should?
 ?show the frequency?data?
2. Is there a way to forward frequency data to the slave port
? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed,
? ? please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
?
?
Big thanks, Bob!
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
?
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
?
?
?
?
|
Re: COMport: Band tracking data
Bob,
big thanks for the answers - appreciated very much.
1. Absolutely clear - thank You.
2.?I tested that (without the amp connected, however) and there was no command shown in the Slave-port debug window when WSJt-X/JTDX took over the Radio-port.
Does that code forward the UDP generated frequency commands without showing them in the Slave-port Debug window, please?
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 16.03.2025 13:16:00
Temat Re: [hamlogger] COMport: Band tracking data
1) If there was a radio connected to the slave port, and the slave polling option was configured, the slave frequency and slave mode fields would be populated.
?
2) If there was something connected to the slave port, the data you see in the debug window would be sent. Yes, there is code (probably untested) that takes frequency changes from JTDX UDP messages and sends then to the slave port (easy enough to test).
?
Or something like that. SeventyThree(s.
?
?
On 03/16/2025 5:36 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.?
I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
?
The Slave port set-up is as follows:
?
It resulted in following the frequency changes of VFO A:
?
and it is how the radio port has been configured:
?
My questions:
?
1. Should?
 ?show the frequency?data?
2. Is there a way to forward frequency data to the slave port
? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed,
? ? please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
?
?
Big thanks, Bob!
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
?
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
?
?
|
Re: COMport: Band tracking data
1) If there was a radio connected to the slave port, and the slave polling option was configured, the slave frequency and slave mode fields would be populated.
?
2) If there was something connected to the slave port, the data you see in the debug window would be sent. Yes, there is code (probably untested) that takes frequency changes from JTDX UDP messages and sends then to the slave port (easy enough to test).
?
Or something like that. SeventyThree(s.
?
?
On 03/16/2025 5:36 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.?
I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
?
The Slave port set-up is as follows:
?
It resulted in following the frequency changes of VFO A:
?
and it is how the radio port has been configured:
?
My questions:
?
1. Should?
 ?show the frequency?data?
2. Is there a way to forward frequency data to the slave port
? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed,
? ? please?
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
?
?
Big thanks, Bob!
?
Best regards,
Alec
?
?
?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
?
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
?
?
|
Re: COMport: Band tracking data
Hi,
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.? I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
The Slave port set-up is as follows:
It resulted in following the frequency changes of VFO A:
and it is how the radio port has been configured:
My questions:
1. Should?  ?show the frequency?data? 2. Is there a way to forward frequency data to the slave port ? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed, ? ? please?
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
Big thanks, Bob!
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
FYI: CheckSpot ver4.01 available now
|
Re: COMport: Band tracking data
Big thanks, Bob!
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
Re: COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
Re: COMport: Band tracking data
Pete,
thank You very much indeed!
It is a 15 pos. D-Sub on the Amplifier?as the Amp can use?some five or six?serial data formats. I have already prepared a COMport-D-Sub interface cable for a Kenwood protocol, which I considered most commonly used on amplifiers.
So, I need to test that configuration...
Big thanks, again, for the hint...
Best regards, Alec?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 17:32:14
Temat Re: [hamlogger] COMport: Band tracking data
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?Search for ¡°slave¡± in the help file. 73¡¯ Pete, N(KD.? Sent from my mobile On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
Re: COMport: Band tracking data
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.? Search for ¡°slave¡± in the help file. 73¡¯ Pete, N(KD.?
toggle quoted message
Show quoted text
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
COMport: Band tracking data
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
Jim K2QB
rick darwicki
Jean-Jos¨¦ JULIEN
Panos
