Re: Getting those Granted QSO's right
Finaly got Clublog updated, don't know what went wrong the first time, anyhow, now I was able to import all to Logger32.
?
Thanks for listening ;-)
|
Re: Getting those Granted QSO's right
|
Re: Getting those Granted QSO's right
I never bother with logger and use LOTW as my bible...
Tom
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: Getting those Granted QSO's right
And how to import this file into Logger32? Cant see this described as a way to import LoTW.
|
Re: Getting those Granted QSO's right
Easy !
In LoTW page, go to Awards menu, select DXCC, and on the page that opens up, choose the lowest menu called DXCC QSL download..
?
Tom GM4FDM when they created LoTW, they manually added your "points" already credited with paper cards. But this operation was poorly done. Some QSOs were intered normally, some were
entered with a wrong date, some were entered even without a callsign (just the prefix). But for the system to work, they HAD TO include the paper card credits, otherwise, ¡ let's say you had Bouvet credited with paper cards, your LoTW numbers had to include
that, so a newer operation that would upload to LoTW would not show as not credited.
?
73
Paul F6EXV
?
?
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: Getting those Granted QSO's right
I have never submitted a paper qsl for DXCC, they are all LoTW.?
It is the Granted ones I cant get right.
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I just looked at the picture again. If you are using the PowerSDR or SamrtSDR selection in your Logger32 radio setup, you have more problems than just CW.
?
The signature series flex radios CAT commands support the following radio modes LSB USB CWL CWU FM AM DIGU DIGLSAM FDV and DSTR
?
Your PKT USB and CW rows do not exist in Flex speak, so they are ignored and the radio is switched to USB or LSB depending on what band it is operation.
?
Or something like that. SeventyThree(s).
On 03/09/2025 2:01 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
[Edited Message Follows]
HI of course I have tried the BandMode selections... nothing
the bandmap goes always to USB even if radio&cluster are in CW
...will look again tnx for inputs
?
@Gary: this error has began from v4033, untill then was OK.... and I stay in full of the CW QRG at 14020
???????????? tried also on 40 and 15 same error
?
?
73
?
Phil
?
PS band&modes crop ?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
... and if you click on a 40m CW DX Spot, does the radio change to LSB? SeventyThree(s).
On 03/10/2025 2:27 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
GE, for what I am doing nothing happens with this ERROR.
Per sure I have done a bad manouvre somewhere and now the SPOT_click changes the mode from cw to SSB
.....
looking ahead...
73
Phil
|
Re: Getting those Granted QSO's right
I assume your logger file contains QSLs from paper as wel as electronic??? LOTW only contains confirmations from other stations who have uploaded to LOTW.
Tom
GM4FDM
Hi
?
I have tried to follow the manual step by step to import my approved qso's from LoTW into Logger32, but I can't get it right.
?
I downloaded the QSO file from LoTW, imported it into Logger32 using the Synchronize LOTW from an ADIF file option, but there are huge differences between LoTW and Logger32:
?
Logger32:
?
LoTW:
?
?
Challenge Lotw 2179, Logger32 2039
?
What am I doing wrong?
?
73 de Tom, LA9GX
|
Getting those Granted QSO's right
Hi
?
I have tried to follow the manual step by step to import my approved qso's from LoTW into Logger32, but I can't get it right.
?
I downloaded the QSO file from LoTW, imported it into Logger32 using the Synchronize LOTW from an ADIF file option, but there are huge differences between LoTW and Logger32:
?
Logger32:
?
LoTW:
?
?
Challenge Lotw 2179, Logger32 2039
?
What am I doing wrong?
?
73 de Tom, LA9GX
|
Re: Import of Chinese stations
Thanks Bob, that worked very well.
?
Sorry for not finding the solution available in the manual ;-)
?
Tom, LA9GX
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
GE, for what I am doing nothing happens with this ERROR.
Per sure I have done a bad manouvre somewhere and now the SPOT_click changes the mode from cw to SSB
.....
looking ahead...
73
Phil
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
HI Bob, it is not a hating problem , it is only a "guessing" of what the Programmer has thought
when has developed a set of instructions that changes my mode HI HA HO.
All has been fine untill v.40332... now is v.40335 and if I rollback again I lose also all the CWMachine_Macros...
73
Phil
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I suspect PowerSDR and SmartSDR does not know what CW is. Try changing the Radio Mode setting in your BandPlan to either CWL or CWU. SeventyThree(s).
?
PS. Don't you just hate it when your radio is smarter than you are?
On 03/10/2025 4:22 AM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
Hi Bob , the radio Is a Flex8k6 and the interface is SDC.
One more test Is conecting the L32 Telnet directly to a host and not via SDC
?
73
Phil
?
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
Hi Bob , the radio Is a Flex8k6 and the interface is SDC.
One more test Is conecting the L32 Telnet directly to a host and not via SDC
?
73
Phil
?
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
... and what radio type have you configured? SeventyThree(s).
On 03/09/2025 2:01 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
[Edited Message Follows]
HI of course I have tried the BandMode selections... nothing
the bandmap goes always to USB even if radio&cluster are in CW
...will look again tnx for inputs
?
@Gary: this error has began from v4033, untill then was OK.... and I stay in full of the CW QRG at 14020
???????????? tried also on 40 and 15 same error
?
?
73
?
Phil
?
PS band&modes crop ?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
HI of course I have tried the BandMode selections... nothing
the bandmap goes always to USB even if radio&cluster are in CW
...will look again tnx for inputs
?
@Gary: this error has began from v4033, untill then was OK.... and I stay in full of the CW QRG at 14020
???????????? tried also on 40 and 15 same error
?
?
73
?
Phil
?
PS band&modes crop ? 
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
There is also a menu option (at the middle of page 321 of the help file) that will take the mode from the comments of a DX Spot and use that as the mode to switch to. SeventyThree(s).
On 03/09/2025 1:38 PM EDT Bob <k4cy@...> wrote:
?
?
Look at section 2.6 (page 46) of the help file. There are three options to select the mode when you click on a DX Spot.?SeventyThree(s)?
On 03/09/2025 1:09 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
HI, this behaviour happens from v4033,
if I click a CW spot on the L32 bandmap it is changed to USB.
That happens also on other bands.
I have already "backrolled" to v.4032 and the bandmap click is OK.
In the mean time a solution is found I go back to v.4032
73
Phil
ex-ic8pof, now iu0ebv
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
Look at section 2.6 (page 46) of the help file. There are three options to select the mode when you click on a DX Spot.?SeventyThree(s)?
On 03/09/2025 1:09 PM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
HI, this behaviour happens from v4033,
if I click a CW spot on the L32 bandmap it is changed to USB.
That happens also on other bands.
I have already "backrolled" to v.4032 and the bandmap click is OK.
In the mean time a solution is found I go back to v.4032
73
Phil
ex-ic8pof, now iu0ebv
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
Have you checked your bands and modes table, Phil?? That is the starting point for associating modes with frequencies.
Also, DX spot comments sometimes include the mode, and that can override the bands and modes defaults.
73 Gary? ?beater/tester &?
Honor Roll &? checker
[Edited Message Follows]
HI, this behaviour happens from v4033,
if I click a CW spot on the L32 bandmap it is changed to USB.
That happens also on other bands.
I have already "backrolled" to v.4032 and the bandmap click is OK.
In the mean time a solution is found I go back to v.4032
73
Phil
ex-ic8pof, now iu0ebv
?
ps: now has done same error on the older v.4032
?
|
ZL2iFB