I'll just have to impose reciprocal tariffs?in the license/maintenance fees :)
?
On 03/12/2025 5:03 AM EDT Barry GM4GIF via groups.io <gm4gif@...> wrote:
?
?
Same here Bob, and I hope any tariffs aren¡¯t going to affect your intake!
Cheers
Barry / gm4gif
I second that emotion!
?
Hey, nice to hear some good news on the reflector for a change.
?
Cheers all,
Gary?
?beater/tester &?
Honor Roll &? checker
Thanks for a great logging program Bob.
Just a note to say cheers and hope you alchemy conversions are going well.
Charles,
W4CEW
?
?
?
?
|
Same here Bob, and I hope any tariffs aren¡¯t going to affect your intake! Cheers Barry / gm4gif
I second that emotion!
Hey, nice to hear some good news on the reflector for a change.
Cheers all, Gary? ?beater/tester &?
Honor Roll &? checker
Thanks for a great logging program Bob.
Just a note to say cheers and hope you alchemy conversions are going well.
Charles,
W4CEW
|
I second that emotion!
Hey, nice to hear some good news on the reflector for a change.
Cheers all, Gary? ?beater/tester &?
Honor Roll &? checker
Thanks for a great logging program Bob.
Just a note to say cheers and hope you alchemy conversions are going well.
Charles,
W4CEW
|
Thanks for a great logging program Bob.
Just a note to say cheers and hope you alchemy conversions are going well.
Charles,
W4CEW
|
Re: Problem with telnet (ve7cc)
Mornin' Helga.
It is not unusual for any single cluster node to have occasional problems: they are, after all, self-funded hobby setups by radio hams, not professional highly-resilient cloud-based banking or missile command systems costing $millions.
VE7CC's cluster has been less reliable than normal, lately, and it is usually turned off while Lee is contesting (usually it automatically fails over to AE5E's node).??
Through different tabs of the DX Cluster window, we can connect simultaneously to multiple clusters.? ?So even if one is down, another may not be.
Lately I have been using the FOC cluster plus W4MYA's cluster routinely, and I am trying-out IZ2LSC's cluster with its SOTA and POTA feeds.??
Here's my Cluster User setup right now, in VE7CC's Cluster User program:
There is information about the cluster setup, including CLuster User, in chapter 13 of the .? ?There's a table listing some reasonably reliable clusters in the FAQs for chapter 14.
73 Gary? ?beater/tester &?
Honor Roll &? checker
Hi,
Since this morning I have not been able to get the VE7CC cluster to work. The cluster window is this, no changes in the telnet commands.
I really don't know how to get the cluster to work again, apart from changing the node
Thanks for any hint
in3fhe, Helga
?
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
HI Bob, the screen crops I pasted before are from L32 Edit Band&Modes windows.
If I am right I have changed only CW portion from 14120 to 14150.
I am going to try and rollback to very last v.40322 and see what happens
73
Phil
?
PS as already written the Flex&SDC combo has no faulty commands as L32 ALONE has same error result
and N1MM works ok.
Anyway will give a LOOK also at MODEs in the Flex&SDC_config
?
73
Phil
|
I see (almost) the same thing. When this window opens, I can type the enter key all day long and nothing happens.? However, If I click the mouse on the START button, I am immediately prompted to select a location of where the ADIF file is to be created/used. SeventyThree(s).
?
On 03/11/2025 1:23 PM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
ERROR TRAPPING is enabled.
?
File/Export Logs/ADIF (.adi) file
?
ENTER KEY
?
Logger32 (Not Responding)
First things first. Make? backup of your logbook somewhere safe ...
?
Click VIEW. Check the menu option ENABLE ERROR TRAPPING. Now please tell me exactly (step by step) what you do, and what you see when you try to export you log with Logger32
?
SeventyThree(s).
?
?
?
?
I'm trying to export it as an adif backup file to a thumb drive.
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
?
?
?
?
|
ERROR TRAPPING is enabled.
File/Export Logs/ADIF (.adi) file
ENTER KEY
Logger32 (Not Responding)
First things first. Make? backup of your logbook somewhere safe ...
?
Click VIEW. Check the menu option ENABLE ERROR TRAPPING. Now please tell me exactly (step by step) what you do, and what you see when you try to export you log with Logger32
?
SeventyThree(s).
?
?
?
?
I'm trying to export it as an adif backup file to a thumb drive.
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
?
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
From the SmartSDR documentatiom - there is no radio mode CW, use CWU or CWL.SeventyThree(s).
?
On 03/11/2025 10:04 AM EDT Bob <k4cy@...> wrote:
?
?
I see the pictures, but I don't know what I'm looking at.
?
I repeat - PowerSDR and Smart SDR does not know what radio mode CW and radio mode PKT-USB is. There entries in the Radio Mode column of the Setup Bands and Modes window are incorrect. CW Radio Mode must be CWL or CWU. PKT-USB must be DIGUL or DIGU..
?
SeventyThree(s).
On 03/11/2025 5:17 AM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
GM Bob, I repeat : for me the problem is elsewhere in the L32 settings.
Maybe in the EDIT BAND&MODES ?
I have tried L32-telnet connection alone and it makes the same error.
Of course it goes on USB if the freq is above 10Mhz and goes to LSB if below 10Mhz...
?
The Flex radio and SDC combo work ok as I use also N1MM and here is all ok.
?
L32 takes the spots from the SDC server ( or itself alone ) but something has happened after
upgrading from v.40333-34-35 , but now makes same error also in v.40332 as I have copies of
old directories.
?
I recall I have changed the CW in the BAND&MODES edit ... but cannot individuate the error.
?
?
?
73
Phil
?
?
?
|
Bob,
Have you tried exporting your log to your C drive first, then copying it to the thumb drive?
I just exported my 40,000 QSOs to an ADIF file on the C drive and it took a little over 30 seconds to produce a 14MB file. I've not tried to copy it to a thumb drive, but my guess is it would be a bit slower.
Worth a go.
?
John
G4DRS
|
First things first. Make? backup of your logbook somewhere safe ...
?
Click VIEW. Check the menu option ENABLE ERROR TRAPPING. Now please tell me exactly (step by step) what you do, and what you see when you try to export you log with Logger32
?
SeventyThree(s).
?
?
On 03/11/2025 11:09 AM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
I'm trying to export it as an adif backup file to a thumb drive.
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
?
?
|
I'm trying to export it as an adif backup file to a thumb drive.
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
|
Just a SWAG, but are you trying to export a file to LoTW (or eQSL, or somewhere)? If my guess is correct, someone else will have to answer your question, I don't use LoTW (or eQSL). SeventyThree(s).
?
PS. Whatever you're using, at least it works which is better than Logger32 :)
On 03/11/2025 10:16 AM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
?
73,
Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
?
?
?
?
--
Train like you've never won, fence like you've never lost!? 'stro
|
I should have said, EXPORT my log, rather than download. This problem has been on-going for many years here at my shack. Without?resolution, I am using another inferior logging program until I can figure out what is happening with Logger32.
73, Bob/W4GJ
Huh? Download your log from where? Same problem as who? SeventyThree(s)
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
-- Train like you've never won, fence like you've never lost!? 'stro
|
Huh? Download your log from where? Same problem as who? SeventyThree(s)
On 03/11/2025 9:38 AM EDT Bob Lightner via groups.io <bobw4gj@...> wrote:
?
?
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
?
I have Logger 32 version 4.0.335 and Windows 12.
?
Anyone have any ideas on how I can overcome this problem???
?
TNX,
Bob/W4GJ
?
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I see the pictures, but I don't know what I'm looking at.
?
I repeat - PowerSDR and Smart SDR does not know what radio mode CW and radio mode PKT-USB is. There entries in the Radio Mode column of the Setup Bands and Modes window are incorrect. CW Radio Mode must be CWL or CWU. PKT-USB must be DIGUL or DIGU..
?
SeventyThree(s).
On 03/11/2025 5:17 AM EDT ic8pof via groups.io <ic8pof@...> wrote:
?
?
GM Bob, I repeat : for me the problem is elsewhere in the L32 settings.
Maybe in the EDIT BAND&MODES ?
I have tried L32-telnet connection alone and it makes the same error.
Of course it goes on USB if the freq is above 10Mhz and goes to LSB if below 10Mhz...
?
The Flex radio and SDC combo work ok as I use also N1MM and here is all ok.
?
L32 takes the spots from the SDC server ( or itself alone ) but something has happened after
upgrading from v.40333-34-35 , but now makes same error also in v.40332 as I have copies of
old directories.
?
I recall I have changed the CW in the BAND&MODES edit ... but cannot individuate the error.
?
?
?
73
Phil
?
?
?
|
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
I have Logger 32 version 4.0.335 and Windows 12.
Anyone have any ideas on how I can overcome this problem???
TNX, Bob/W4GJ
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
I keep experiencing the same problem with Logger 32 freezing and not responding when I attempt to download my log.
I have Logger 32 version 4.0.335 and Windows 12.
Anyone have any ideas on how I can overcome this problem???
TNX, Bob/W4GJ
HI, this behaviour happens from v4033,
if I click a CW spot on the L32 bandmap it is changed to USB.
That happens also on other bands.
I have already "backrolled" to v.4032 and the bandmap click is OK.
In the mean time a solution is found I go back to v.4032
73
Phil
ex-ic8pof, now iu0ebv
-- Train like you've never won, fence like you've never lost!? 'stro
|
Possible bug with Radio custom setting
Hi Bob,
I configured the radio custom setting to send specific CAT commands on QSY (enable break-in, set preamp, set the monitor off). Following the documented syntax the command sent to the radio is messed up (see the semicolon position).
Custom setting: SSB=BI1;PA01;ML0000;
Command sent to the radio (the semicolon is in the wrong position):
QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014330000;MD02;SH0BI1;PA01;ML0000;;FA014330000;
DX Spot sequence completed : 1 command lines executed in 0,135 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14330 ? QSY Marker: 14330,000
To have it working I need a trick configuring the custom setting like following (always note the semicolon position) : SSB=;BI1;PA01;ML0000
with this the command is OK:
QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014320000;MD02;SH0;BI1;PA01;ML0000;FA014320000;
DX Spot sequence completed : 1 command lines executed in 0,025 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14320 ? QSY Marker: 14320,000
73s
Andrea, IZ2LSC
|
Re: since v 4033 clicking on bandmap in CW changes it to USB
GM Bob, I repeat : for me the problem is elsewhere in the L32 settings.
Maybe in the EDIT BAND&MODES ?
I have tried L32-telnet connection alone and it makes the same error.
Of course it goes on USB if the freq is above 10Mhz and goes to LSB if below 10Mhz...
?
The Flex radio and SDC combo work ok as I use also N1MM and here is all ok.
?
L32 takes the spots from the SDC server ( or itself alone ) but something has happened after
upgrading from v.40333-34-35 , but now makes same error also in v.40332 as I have copies of
old directories.
?
I recall I have changed the CW in the BAND&MODES edit ... but cannot individuate the error.
?
?
?
73
Phil
?
?
?
|
ZL2iFB