开云体育

Hi Bob,

I configured the radio custom setting to send specific CAT commands on QSY (enable break-in, set preamp, set the monitor off).

Following the documented syntax the command sent to the radio is messed up (see the semicolon position).

SSB=BI1;PA01;ML0000;

QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014330000;MD02;SH0BI1;PA01;ML0000;;FA014330000;
DX Spot sequence completed : 1 command lines executed in 0,135 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14330 ? QSY Marker: 14330,000

To have it working I need a trick configuring the custom setting like following (always note the semicolon position) :

SSB=;BI1;PA01;ML0000

QSY Marker Set : Cleared
User action : I'm busy, poll reply ignored
Set radio Freq/Mode : FA014320000;MD02;SH0;BI1;PA01;ML0000;FA014320000;
DX Spot sequence completed : 1 command lines executed in 0,025 seconds. Poll every 100 ms
Poll : IF;
QSY Marker Set : Radio Freq: 14320 ? QSY Marker: 14320,000

73s

Andrea, IZ2LSC