开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Logger32 and CTY file

 

Who is AD1C. what is the/a CTY file?
?
Logger32 uses a file called CTY.XML from Club Log to keep the country/prefix databases? up to date. This file is updates daily, and can be loaded into Logger32 automatically (a user option).
?
See pages 146 to 149? of the Logger32 help file.
SeventyThree(s)

On 05/03/2025 1:25 AM EDT Dusan <ceha@...> wrote:
?
?

Hi,

I have asked Jim AD1C to install cty file in Logger32 but right now it is not possible to install.

Here is the answer from him-see bwlow.

73

Dusan YU1EA.

?


On Thu, May 1, 2025 at 12:11
?AM Du?an ?eha <ceha@...> wrote:
>
> Hello Jim,
> Can we install CTY file in Logger32 please?
> Any advice?
> 73
> Dusan YU1EA

Hello Dusan,

Please ask the software developer(s) for Logger32 to contact me about this.

?

Use:?? Logger32 forum at Groups.io


73 - Jim AD1C



Re: Logger32 and CTY file

 

开云体育

Hi Aki,

Many thanks for the prompt reply, I did not know that, TNX for the info.

?

73, Dusan YU1EA

?

?

From: [email protected] <[email protected]> On Behalf Of ja1nlx via groups.io
Sent: 03 May 2025 07:45
To: Hanlogger <[email protected]>
Subject: Re: [hamlogger] Logger32 and CTY file

?

Dusan

Why you need? that ???

Logger32 has perfect Country/Prefix database which is regularly updated by ClubLog

exception list.

?

73 de aki

JA1NLX

On 2025-05-03 土 14:25:55, Dusan via groups.io <ceha@...> wrote:

Hi,

I have asked Jim AD1C to install cty file in Logger32 but right now it is not possible to install.

Here is the answer from him-see bwlow.

73

Dusan YU1EA.

?


On Thu, May 1, 2025 at 12:11?AM Du?an ?eha <ceha@...> wrote:
>
> Hello Jim,
> Can we install CTY file in Logger32 please?
> Any advice?
> 73
> Dusan YU1EA

Hello Dusan,

Please ask the software developer(s) for Logger32 to contact me about this.

?

Use:?? Logger32 forum at Groups.io


73 - Jim AD1C


Re: Logger32 and CTY file

 

Dusan
Why you need? that ???
Logger32 has perfect Country/Prefix database which is regularly updated by ClubLog
exception list.

73 de aki
JA1NLX

On 2025-05-03 土 14:25:55, Dusan via groups.io <ceha@...> wrote:

Hi,

I have asked Jim AD1C to install cty file in Logger32 but right now it is not possible to install.

Here is the answer from him-see bwlow.

73

Dusan YU1EA.

?


On Thu, May 1, 2025 at 12:11
?AM Du?an ?eha <ceha@...> wrote:
>
> Hello Jim,
> Can we install CTY file in Logger32 please?
> Any advice?
> 73
> Dusan YU1EA

Hello Dusan,

Please ask the software developer(s) for Logger32 to contact me about this.

?

Use:?? Logger32 forum at Groups.io


73 - Jim AD1C



Logger32 and CTY file

 

开云体育

Hi,

I have asked Jim AD1C to install cty file in Logger32 but right now it is not possible to install.

Here is the answer from him-see bwlow.

73

Dusan YU1EA.

?


On Thu, May 1, 2025 at 12:11?AM Du?an ?eha <ceha@...> wrote:
>
> Hello Jim,
> Can we install CTY file in Logger32 please?
> Any advice?
> 73
> Dusan YU1EA

Hello Dusan,

Please ask the software developer(s) for Logger32 to contact me about this.

?

Use:?? Logger32 forum at Groups.io


73 - Jim AD1C



Re: $command

 

The original setup of SSB=xxx, RTTY=xxx, and CW=xxx was correct. The mode used here is the operating mode, not the radio mode. I have made changes?to the #ModeModifier# function and will send you a test version. SeventyThree(s).

On 05/02/2025 8:23 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
?
Bob,
?
I do not think so.
I have changed to CWU and USB, but it did not help,
please...
?
Best regards,
Alec
?
?
------ Wiadomo?? oryginalna ------
Nadawca "Bob via groups.io" <k4cy@...>
Data 02.05.2025 11:37:40
Temat Re: [hamlogger] $command #ModeModifier#;$
?
I haven't tested this, but is the problem that SmartSDR does not have a mode of CW, it uses CWL or CWR. SeventyThree(s).?
?
On 05/02/2025 5:04 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I have tested the following RCP DX Spot macro set-ups:
?
?
?
All is OK, except for #ModeModifier#
which?is supposed to change the radio filters depending on the mode.
Commands are correct - when applied directly. they work beautifully,
e.g.
?
?
Is the?#ModeModifier#?syntax wrong in my set-up?
Help me, please...
?
Best regards,
Alec

?

?


Alamogordo Amateur Radio Club's 39th Annual Hamfest 30 Aug 2025

 

ALAMOGORDO AMATEUR RADIO CLUB'S 39TH ANNUAL HAMFEST
ARRL SANCTIONED
30 Aug ?2025
Otero County Fair grounds (in Alamogordo NM)
7am to 3pm-ish
Admission: Free!!!
Vendors can set up day before 3 to 7pm
Pre-register for Tables and prize tickets. Tables are $15.00 ea (if you have your own table and chairs $6.00 each table space)
Electrical at most of the table locations but not all.
Pre-register so we can get a good table count. Prize drawing tickets postmarked before 23 August $8.00 (pick up at event) If you cannot make it, tickets will be added to Main Prize drawing.
Prize tickets at the door $10.00
Tickets postmarked before 23 August will be eligible for a ?pre-registration prize $50.00 cash.
1st Prize winner responsible for shipping or pick up at event.
2025 Prize list ?1st FT710 AESS 2nd FTM-150R 3rd Mini 1.3 OLED Zumspot 4th DM-30TR
There is a $1.00 Ticket drawing for a FT-4XR
Looking for folks and groups to give presentations, let us know what ya can do
Other Door prizes from Amateur Radio Related and local vendors, drawn throughout the event.
Plenty of parking, RV's welcome, no hook ups but there is a dump station on site
ARRL License testing will be conducted at 9am-ish. Please Bring a photo ID or 2 other forms of ID. FRN must be provided. FRN can be established by registering with FCC
Check K5LRW website, for latest changes ?

Pre-register by Mail: ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Contact
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Hamfest Committee Chair
Alamogordo Amateur Radio Club ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Rusty KI5RUS?rjaskolo@...
HAMFEST 2025 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?575-491-3631 call or text
12 Main St#383 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Or Rick KB7SQF?rick@...
La Luz NM, ?88337 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Hamfest Committee member

E-mail_____________________________ ?Ph#_________________________

Name______________________________ Call_________________________

Address________________________________City__________________St/zip__________________

Make Checks payable to AARC and include your callsign on Check

Prize Tickets Before 23 Aug. at $8.00 x______=$__________ Tables at $15.00 x________=$________
your own $6.00x_____=$________
Dinner(pay as you go) How many?_____________(Location TBA)
Testing or upgrading : Technician / General / Extra (Circle one)


Re: L32 + FlexRadio, issue?

 

开云体育

Works fine.


Thanks for info Frank and Bob.

Correct config is CW|CWL to work with Radio 1 and Radio 2


Many thanks!


?

Fabián Malnero Maccari, EB1TR


De: [email protected] <[email protected]> en nombre de Frank Hunter via groups.io <gi4nkb@...>
Enviado: viernes, 2 de mayo de 2025 12:06:36
Para: [email protected]
Asunto: Re: [hamlogger] L32 + FlexRadio, issue?
?
Hi Fabian,
?
Smartsdr understands cwl or cwu NOT cw and you must change the radio mode in bands&modes to cwl or cwu - whichever sideband you have configured in Smartsdr. You really need to read section 2.5.1 of the excellent manual and you also need to read and apply Hinsons tip on page 42. Logger32 when configured correctly works flawlessly with Smartsdr.

73, Frank GI4NKB


Re: $command

 



Bob,

I do not think so.
I have changed to CWU and USB, but it did not help,
please...

Best regards,
Alec


------ Wiadomo?? oryginalna ------
Nadawca "Bob via groups.io" <k4cy@...>
Data 02.05.2025 11:37:40
Temat Re: [hamlogger] $command #ModeModifier#;$

I haven't tested this, but is the problem that SmartSDR does not have a mode of CW, it uses CWL or CWR. SeventyThree(s).?
?
On 05/02/2025 5:04 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I have tested the following RCP DX Spot macro set-ups:
?
?
?
All is OK, except for #ModeModifier#
which?is supposed to change the radio filters depending on the mode.
Commands are correct - when applied directly. they work beautifully,
e.g.
?
?
Is the?#ModeModifier#?syntax wrong in my set-up?
Help me, please...
?
Best regards,
Alec


Re: Logger hanging

 

Section 34.9 (page 780) of the help file is dedicated to this topic. SeventyThree(s).

On 05/02/2025 7:59 AM EDT sp5ewx via groups.io <sp5ewx@...> wrote:
?
?

Hi Dirk ...thank you ...will do that
73's
Mike sp5ewx


pt., 2 maj 2025, 09:00 u?ytkownik ON4CT via <on4ct=[email protected]> napisa?:
Mike
?
Check in task manager what kind of programs are unnecessary running.??? Junk can slowndown ur pc and eating memory.

Dirk on4ct

?

?


Re: Logger hanging

 

Hi Dirk ...thank you ...will do that
73's
Mike sp5ewx


pt., 2 maj 2025, 09:00 u?ytkownik ON4CT via <on4ct=[email protected]> napisa?:

Mike
?
Check in task manager what kind of programs are unnecessary running.??? Junk can slowndown ur pc and eating memory.

Dirk on4ct


Re: L32 + FlexRadio, issue?

 

Hi Fabian,
?
Smartsdr understands cwl or cwu NOT cw and you must change the radio mode in bands&modes to cwl or cwu - whichever sideband you have configured in Smartsdr. You really need to read section 2.5.1 of the excellent manual and you also need to read and apply Hinsons tip on page 42. Logger32 when configured correctly works flawlessly with Smartsdr.

73, Frank GI4NKB


Re: L32 + FlexRadio, issue?

 

You haven't read the manual have you? Try CW/CWL This sets the radio mode as CW for radio 1, and CWL for radio 2. SeventyThree(s).

On 05/02/2025 5:30 AM EDT Fabian/EB1TR via groups.io <fabian@...> wrote:
?
?
Thanks Frank for answer…
?
This is my config (band/mode) for 40m (for example). This works OK on my RADIO 1 (Elecraft K3) but wrong mode, as I said, on RADIO 2 (FlexRadio 8400).
?
Captura de pantalla 2025-05-02 a las 11.27.03.png
?
Thanks!

Fabián Malnero Maccari, EB1TR

El 2 may 2025, a las 11:21, Frank Hunter via groups.io <gi4nkb@...> escribió:
Hi Fabian,
In Smartsdr navigate to settings -> radio setup -> phone/cw and select which sideband you wish to use in cw either CWL or CWU,? CWL preferred.

In Logger32 navigate to Tools -> setup bands & modes? and make sure that the cw sections of the bands are configured to use which sideband you selected in Smartsdr.

I've attached an image that probably shows what I mean better than I just typed :-)

73, Frank GI4NKB
<smartsdr.jpg>


Re: $command

 

I haven't tested this, but is the problem that SmartSDR does not have a mode of CW, it uses CWL or CWR. SeventyThree(s).?
?

On 05/02/2025 5:04 AM EDT Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
?
Hi,
?
I have tested the following RCP DX Spot macro set-ups:
?
?
?
All is OK, except for #ModeModifier#
which?is supposed to change the radio filters depending on the mode.
Commands are correct - when applied directly. they work beautifully,
e.g.
?
?
Is the?#ModeModifier#?syntax wrong in my set-up?
Help me, please...
?
Best regards,
Alec


Re: L32 + FlexRadio, issue?

 

开云体育

Thanks Frank for answer…

This is my config (band/mode) for 40m (for example). This works OK on my RADIO 1 (Elecraft K3) but wrong mode, as I said, on RADIO 2 (FlexRadio 8400).

Captura de pantalla 2025-05-02 a las 11.27.03.png

Thanks!


Fabián Malnero Maccari, EB1TR

El 2 may 2025, a las 11:21, Frank Hunter via groups.io <gi4nkb@...> escribió:

Hi Fabian,
In Smartsdr navigate to settings -> radio setup -> phone/cw and select which sideband you wish to use in cw either CWL or CWU,? CWL preferred.

In Logger32 navigate to Tools -> setup bands & modes? and make sure that the cw sections of the bands are configured to use which sideband you selected in Smartsdr.

I've attached an image that probably shows what I mean better than I just typed :-)

73, Frank GI4NKB
<smartsdr.jpg>


Re: L32 + FlexRadio, issue?

 

Hi Fabian,
In Smartsdr navigate to settings -> radio setup -> phone/cw and select which sideband you wish to use in cw either CWL or CWU,? CWL preferred.

In Logger32 navigate to Tools -> setup bands & modes? and make sure that the cw sections of the bands are configured to use which sideband you selected in Smartsdr.

I've attached an image that probably shows what I mean better than I just typed :-)

73, Frank GI4NKB


Re: L32 + FlexRadio, issue?

 

Look at your BandPlan (TOOLS?| SETUP BANDS & MODES).
Column 6 for Radio Mode
What is the Radio Mode set to on the CW rows??
Flex radios do not have a "CW" radio mode, they use CWL or CWR.
?
SeventyThree(s).
?

On 05/02/2025 4:11 AM EDT Fabian/EB1TR via groups.io <fabian@...> wrote:
?
?
Debug data:
?

?
?

Fabián Malnero Maccari, EB1TR

El 2 may 2025, a las 9:55, Fabian/EB1TR via groups.io <fabian@...> escribió:

Good morning,

I have a problem and I'm not sure if it could be related to configuration.

When I change frequency, the mode change command to CW doesn't seem to be sent correctly.

Switching to USB and LSB works fine, but L32 appears to send ZZMD00 for CW frequencies, where I believe it should be ZZMD04.

Any ideas?


Fabián Malnero Maccari, EB1TR


$command

 


Hi,

I have tested the following RCP DX Spot macro set-ups:

?

All is OK, except for #ModeModifier#
which?is supposed to change the radio filters depending on the mode.
Commands are correct - when applied directly. they work beautifully,
e.g.
?

Is the?#ModeModifier#?syntax wrong in my set-up?
Help me, please...

Best regards,
Alec


Re: L32 + FlexRadio, issue?

 

开云体育

Debug data:





Fabián Malnero Maccari, EB1TR

El 2 may 2025, a las 9:55, Fabian/EB1TR via groups.io <fabian@...> escribió:

Good morning,

I have a problem and I'm not sure if it could be related to configuration.

When I change frequency, the mode change command to CW doesn't seem to be sent correctly.

Switching to USB and LSB works fine, but L32 appears to send ZZMD00 for CW frequencies, where I believe it should be ZZMD04.

Any ideas?



Fabián Malnero Maccari, EB1TR



L32 + FlexRadio, issue?

 

开云体育

Good morning,

I have a problem and I'm not sure if it could be related to configuration.

When I change frequency, the mode change command to CW doesn't seem to be sent correctly.

Switching to USB and LSB works fine, but L32 appears to send ZZMD00 for CW frequencies, where I believe it should be ZZMD04.

Any ideas?



Fabián Malnero Maccari, EB1TR


Re: Logger hanging

 

Mike
?
Check in task manager what kind of programs are unnecessary running.??? Junk can slowndown ur pc and eating memory.

Dirk on4ct