Re: LotW Sent-Flags not set after uploading
|
and someone reported before that the similar problem solved when TQSL was updated.
On 2024-11-04 ÔÂê×ÈÕ 8:10:11, ja1nlx via groups.io <ayoshida0205@...> wrote:
I checked this with the latest Logger32 and LogSync. LoTW QSL Sent flag are set correctly.
On 2024-11-04 ÔÂê×ÈÕ 7:46:43, Lorenz Grassl, DL8RDL via groups.io <mailingliste2@...> wrote:
Hi to all those L32-users!
My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)
Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual
question concerning the "LotW-flags" (remove the "send" and add the
"sent to" flags). As usual I clicked "OK" and rather quick the
LogSync-Utility said: "upload complete". "That was quick!" I thought
and waited for the "single QSO-action" (handling each QSO seperately
while uploading) while uploading to LotW we saw the last year or so.
But: there was no seperate QSO-handling anymore! The "send to
LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was
set.
Then I looked up my QSOs at LotW and found all my uploaded QSOs
there. So far, so good! Obviously everything went fine and very
quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw,
that one of those 60 new QSOs was already QSLd and I downloaded my
single QSL from LotW using LogSync. This and the import into L32
worked fine AND: in this particular QSO the flags "LotW received"
and "lotW-Sent"-flag in L32 were set correctly then.
Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"?
(except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary
anymore to handle each QSO seperately as it was the last year (or
maybe longer)?
73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL
|
