开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Hamlogger
  2. Topics

LotW Sent-Flags not set after uploading

 

开云体育

Hi to all those L32-users!

My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)

Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual question concerning the "LotW-flags" (remove the "send" and add the "sent to" flags). As usual I clicked "OK" and rather quick the LogSync-Utility said: "upload complete". "That was quick!" I thought and waited for the "single QSO-action" (handling each QSO seperately while uploading) while uploading to LotW we saw the last year or so. But: there was no seperate QSO-handling anymore! The "send to LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was set.

Then I looked up my QSOs at LotW and found all my uploaded QSOs there. So far, so good! Obviously everything went fine and very quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw, that one of those 60 new QSOs was already QSLd and I downloaded my single QSL from LotW using LogSync. This and the import into L32 worked fine AND: in this particular QSO the flags "LotW received" and "lotW-Sent"-flag in L32 were set correctly then.

Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"? (except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary anymore to handle each QSO seperately as it was the last year (or maybe longer)?

73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL
 

I checked this with the latest Logger32 and LogSync.
LoTW QSL Sent flag are set correctly.

73 de aki
JA1NLX

On 2024-11-04 月曜日 7:46:43, Lorenz Grassl, DL8RDL via groups.io <mailingliste2@...> wrote:

Hi to all those L32-users!

My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)

Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual question concerning the "LotW-flags" (remove the "send" and add the "sent to" flags). As usual I clicked "OK" and rather quick the LogSync-Utility said: "upload complete". "That was quick!" I thought and waited for the "single QSO-action" (handling each QSO seperately while uploading) while uploading to LotW we saw the last year or so. But: there was no seperate QSO-handling anymore! The "send to LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was set.

Then I looked up my QSOs at LotW and found all my uploaded QSOs there. So far, so good! Obviously everything went fine and very quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw, that one of those 60 new QSOs was already QSLd and I downloaded my single QSL from LotW using LogSync. This and the import into L32 worked fine AND: in this particular QSO the flags "LotW received" and "lotW-Sent"-flag in L32 were set correctly then.

Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"? (except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary anymore to handle each QSO seperately as it was the last year (or maybe longer)?

73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL
 

and someone reported before that the similar problem solved when TQSL was updated.
Check your TQSL.

73 de aki
JA1NLX

On 2024-11-04 月曜日 8:10:11, ja1nlx via groups.io <ayoshida0205@...> wrote:

I checked this with the latest Logger32 and LogSync.
LoTW QSL Sent flag are set correctly.

73 de aki
JA1NLX

On 2024-11-04 月曜日 7:46:43, Lorenz Grassl, DL8RDL via groups.io <mailingliste2@...> wrote:

Hi to all those L32-users!

My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)

Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual question concerning the "LotW-flags" (remove the "send" and add the "sent to" flags). As usual I clicked "OK" and rather quick the LogSync-Utility said: "upload complete". "That was quick!" I thought and waited for the "single QSO-action" (handling each QSO seperately while uploading) while uploading to LotW we saw the last year or so. But: there was no seperate QSO-handling anymore! The "send to LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was set.

Then I looked up my QSOs at LotW and found all my uploaded QSOs there. So far, so good! Obviously everything went fine and very quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw, that one of those 60 new QSOs was already QSLd and I downloaded my single QSL from LotW using LogSync. This and the import into L32 worked fine AND: in this particular QSO the flags "LotW received" and "lotW-Sent"-flag in L32 were set correctly then.

Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"? (except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary anymore to handle each QSO seperately as it was the last year (or maybe longer)?

73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL
 

开云体育

Am 04.11.2024 um 00:10 schrieb ja1nlx:
I checked this with the latest Logger32 and LogSync.
LoTW QSL Sent flag are set correctly.
Even now I paid another, closer look to the GUI of LogSync?s "LotW-area". I saw an important change: in this new version 2.0.19.8 now there?s a checkbox which has to be checked if the user wants to have the "Sent to" flags updated in L32. That was one I did not expect. I?m sure it will work next time. I will set my 60 flags manually and everything will be fine.

TNX to all who thought already about that.

73 de Lenz,
DL8RDL

PS: TQSL is also the latest version, was updated yesterday


73 de aki
JA1NLX

On 2024-11-04 月曜日 7:46:43, Lorenz Grassl, DL8RDL via groups.io <mailingliste2@...> wrote:

Hi to all those L32-users!

My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)

Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual question concerning the "LotW-flags" (remove the "send" and add the "sent to" flags). As usual I clicked "OK" and rather quick the LogSync-Utility said: "upload complete". "That was quick!" I thought and waited for the "single QSO-action" (handling each QSO seperately while uploading) while uploading to LotW we saw the last year or so. But: there was no seperate QSO-handling anymore! The "send to LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was set.

Then I looked up my QSOs at LotW and found all my uploaded QSOs there. So far, so good! Obviously everything went fine and very quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw, that one of those 60 new QSOs was already QSLd and I downloaded my single QSL from LotW using LogSync. This and the import into L32 worked fine AND: in this particular QSO the flags "LotW received" and "lotW-Sent"-flag in L32 were set correctly then.

Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"? (except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary anymore to handle each QSO seperately as it was the last year (or maybe longer)?

73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL
 

开云体育

That checkbox has allways been there...

73
Jan PA4JJ

Op 4-11-2024 om 00:27 schreef Lorenz Grassl, DL8RDL via groups.io:
Am 04.11.2024 um 00:10 schrieb ja1nlx:
I checked this with the latest Logger32 and LogSync.
LoTW QSL Sent flag are set correctly.
Even now I paid another, closer look to the GUI of LogSync?s "LotW-area". I saw an important change: in this new version 2.0.19.8 now there?s a checkbox which has to be checked if the user wants to have the "Sent to" flags updated in L32. That was one I did not expect. I?m sure it will work next time. I will set my 60 flags manually and everything will be fine.

TNX to all who thought already about that.

73 de Lenz,
DL8RDL

PS: TQSL is also the latest version, was updated yesterday


73 de aki
JA1NLX

On 2024-11-04 月曜日 7:46:43, Lorenz Grassl, DL8RDL via groups.io <mailingliste2@...> wrote:

Hi to all those L32-users!

My setup:
- L32 .329 (latest version)
LogSync 2.0.19.8 (latest version)

Today I observed the following behaviour:
I uploaded about 60 QSOs to LotW and as usual, L32 asked his usual question concerning the "LotW-flags" (remove the "send" and add the "sent to" flags). As usual I clicked "OK" and rather quick the LogSync-Utility said: "upload complete". "That was quick!" I thought and waited for the "single QSO-action" (handling each QSO seperately while uploading) while uploading to LotW we saw the last year or so. But: there was no seperate QSO-handling anymore! The "send to LotW"-flag was removed from the QSOs BUT: no "sent to LotW"-flag was set.

Then I looked up my QSOs at LotW and found all my uploaded QSOs there. So far, so good! Obviously everything went fine and very quick. Except setting the "ent to LotW"-flags in L32. At LotW I saw, that one of those 60 new QSOs was already QSLd and I downloaded my single QSL from LotW using LogSync. This and the import into L32 worked fine AND: in this particular QSO the flags "LotW received" and "lotW-Sent"-flag in L32 were set correctly then.

Three questions:
1. Is there an issue between the latest LogSync-version and L32?
2. what?s the best practice to set 60 "Sent to LotW"-flags to "Y"? (except from doing it manually 60 times) ? ;-)
3. is there a change at LotW which doesn?t make it neccessary anymore to handle each QSO seperately as it was the last year (or maybe longer)?

73 and tnx for your thoughts concerning this issue de Lenz,
DL8RDL


-- 
____________________________________________________
my dxspider clusters running on a raspberry pi:  
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388

1 - 5 of 5