Re: Rcp
|
Hi Andy The best I came up with for mine were; LSB? ? $hexcommand FE FE 98 E0 01 00 ## FD$
USB? ? $hexcommand FE FE 98 E0 01 01 ## FD$
CW? ? $hexcommand FE FE 98 E0 01 03 ## FD$
RTTY? ? $hexcommand FE FE 98 E0 01 04 ## FD$
Replace the ## with 01 , 02 , 03 for the corresponding filter.
You would need to use three buttons (one for each filter) in the RCP for each mode. (I could not find a method that did not include the mode in the command) There is also a command with which you can change the width of the currently selected filter;
$hexcommand FE FE 98 E0 1A 03 ** FD$
Replace ** with the required number as per this table: Again, multiple RCP buttons would be required for different choices. Tip; if you only are using one radio at a time open the RCP in SO2V mode, it doubles the number of available buttons. Hope this is of some use to you. 73 John - G7SSE ------ Original Message ------
From: "Andy M0NKR via groups.io" <andrewgoldsmith22@...>
Sent: 27/07/2021 16:32:47
Subject: [hamlogger] Rcp Hi
?
New to the RCP screen
?
Can you set a button for the different filter setting on the radio?
?
If so can someone help please.
?
Radio is icom 7610
?
73
Andy
M0NKR
?
?
?
?
-- 73, John - G7SSE |
John Munton - G7SSE