Re: Special acrylic drill bits
I¡¯ve got some, but out of town until the 13th or so
toggle quoted message
Show quoted text
On May 2, 2025, at 5:45?PM, Mark Cigal via groups.io <mcigal38@...> wrote:
? Greetings, ? Steve and I are working?on the RV4 canopy and have a need for some special drill bits to drill through the acrylic canopy. Does anyone have any ? Ideally?we would like 3/32, but the more popular 1/8 size will work.
Mark
|
Special acrylic drill bits
Greetings, ? Steve and I are working?on the RV4 canopy and have a need for some special drill bits to drill through the acrylic canopy. Does anyone have any ? Ideally?we would like 3/32, but the more popular 1/8 size will work.
Mark
|
|
|
|
|
|
|
|
|
Re: The First Bird Is Back In The Nest!
toggle quoted message
Show quoted text
On Thu, May 1, 2025, 5:13?PM Jerry Marstall via <jerrylm1986= [email protected]> wrote: Gorgeous. She needs some friends?
On Thu, May 1, 2025, 4:28?PM Timothy Higgins via <timothyahiggins= [email protected]> wrote:
Welcome home, Tim Anderson! Tim¡¯s beautiful Cessna 182A is the first full time resident to be back in the museum hangar.?
|
Re: The First Bird Is Back In The Nest!
Gorgeous. She needs some friends?
On Thu, May 1, 2025, 4:28?PM Timothy Higgins via <timothyahiggins= [email protected]> wrote:
Welcome home, Tim Anderson! Tim¡¯s beautiful Cessna 182A is the first full time resident to be back in the museum hangar.?
|
Re: The First Bird Is Back In The Nest!
toggle quoted message
Show quoted text
Welcome home, Tim Anderson! Tim¡¯s beautiful Cessna 182A is the first full time resident to be back in the museum hangar.?
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
Still missing then I guess
Take care,
Tim H.
Hi Tim
?
The socket is? both? ?3/8" drive and 3/8" bolt size.
?
Steve
|
Re: The First Bird Is Back In The Nest!
toggle quoted message
Show quoted text
On May 1, 2025, at 2:01?PM, Alex Nelon via groups.io <alex.nelon@...> wrote:
? Welcome home, Tim Anderson! Tim¡¯s beautiful Cessna 182A is the first full time resident to be back in the museum hangar.?
|
The First Bird Is Back In The Nest!
Welcome home, Tim Anderson! Tim¡¯s beautiful Cessna 182A is the first full time resident to be back in the museum hangar.?
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
You guys need to work for Boeing! :)
On Thu, May 1, 2025 at 12:15?PM Daryl.Habit via <daryl.habit= [email protected]> wrote: That¡¯s a lot of loose behavior with some tools¡like something from the 60¡¯s
On Thu, May 1, 2025 at 12:11, Dennis Carlson via < dennis.carlson.atgs@...> wrote:
I¡¯m short my 3/8¡± SK ratchet that I¡¯ve had since 1969. ?
It¡¯s like the one Mark had without the green strip on the handle.? I¡¯d like to get my old friend back if it shows up.
Dennis
On Thu, May 1, 2025 at 11:43?AM David Erickson via
<Davidgerickson66=
[email protected]> wrote:
Hi Steve,
My CRAFTSMAN 3/8" short socket might be among the mix.
I have someone's ALLTRADE brand 3/8" short socket that ended up on my ratchet instead.? I noticed that later on Saturday, but wasn't worried about it.
Dave
On Thu, May 1, 2025, 9:29 AM Timothy Higgins via
<timothyahiggins=
[email protected]> wrote:
1/4 " drive?
Could be mine.
?
Take care,
Tim H.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
Hi Tim
?
The socket is? both? ?3/8" drive and 3/8" bolt size.
?
Steve
|
A hearty welcome to you, Nancy. Hope to see you more often (a tall order now that the RV-12 wings are on) . .?
Looking forward to the May concerts!
-a
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
That¡¯s a lot of loose behavior with some tools¡like something from the 60¡¯s
On Thu, May 1, 2025 at 12:11, Dennis Carlson via groups.io < dennis.carlson.atgs@...> wrote:
I¡¯m short my 3/8¡± SK ratchet that I¡¯ve had since 1969. ?
It¡¯s like the one Mark had without the green strip on the handle.? I¡¯d like to get my old friend back if it shows up.
Dennis
On Thu, May 1, 2025 at 11:43?AM David Erickson via
<Davidgerickson66=
[email protected]> wrote:
Hi Steve,
My CRAFTSMAN 3/8" short socket might be among the mix.
I have someone's ALLTRADE brand 3/8" short socket that ended up on my ratchet instead.? I noticed that later on Saturday, but wasn't worried about it.
Dave
On Thu, May 1, 2025, 9:29 AM Timothy Higgins via
<timothyahiggins=
[email protected]> wrote:
1/4 " drive?
Could be mine.
?
Take care,
Tim H.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
I¡¯m short my 3/8¡± SK ratchet that I¡¯ve had since 1969. ?
It¡¯s like the one Mark had without the green strip on the handle.? I¡¯d like to get my old friend back if it shows up.
Dennis
On Thu, May 1, 2025 at 11:43?AM David Erickson via <Davidgerickson66= [email protected]> wrote: Hi Steve,
My CRAFTSMAN 3/8" short socket might be among the mix.
I have someone's ALLTRADE brand 3/8" short socket that ended up on my ratchet instead.? I noticed that later on Saturday, but wasn't worried about it.
Dave
On Thu, May 1, 2025, 9:29 AM Timothy Higgins via <timothyahiggins= [email protected]> wrote: 1/4 " drive?
Could be mine.
?
Take care,
Tim H.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
Hi Steve,
My CRAFTSMAN 3/8" short socket might be among the mix.
I have someone's ALLTRADE brand 3/8" short socket that ended up on my ratchet instead.? I noticed that later on Saturday, but wasn't worried about it.
Dave
On Thu, May 1, 2025, 9:29 AM Timothy Higgins via <timothyahiggins= [email protected]> wrote: 1/4 " drive?
Could be mine.
?
Take care,
Tim H.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
Re: 3/8" deep Craftsman Socket Found.....in my pocket.
1/4 " drive?
Could be mine.
?
Take care,
Tim H.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
3/8" deep Craftsman Socket Found.....in my pocket.
During the hangar door work sessions, I picked up someone's 3/8" deep Craftsman socket.? ?Let me know if you are missing one.? ?
?
(Luckily, I found it prior to Karen doing the wash.....I am always in trouble for clanking noises in the washer\dryer)
?
Steve
|
Mark Cigal
Alex Nelon
Timothy Higgins